FS: FRPP X-Pipe
10-28-2009, 09:22 AM
#11
2nd Gear Member
Thread Starter
Join Date: Jan 2007
Location: .
Posts: 253
bump..
11-05-2009, 01:58 PM
#12
2nd Gear Member
Thread Starter
Join Date: Jan 2007
Location: .
Posts: 253
bump..
11-05-2009, 02:31 PM
#13
1st Gear Member
Join Date: Mar 2009
Location: Missouri
Posts: 92
Does this replace the stock H pipe, or do you need additional parts?
11-05-2009, 02:41 PM
#14
2nd Gear Member
Thread Starter
Join Date: Jan 2007
Location: .
Posts: 253
it replaces the stock H. the X is held in place by clamps.
11-05-2009, 03:47 PM
#15
2nd Gear Member
Join Date: Jun 2009
Location: WI
Posts: 184
I'm going to assume this is not from the FRPP kit so it won't fit a v6 right ?
11-05-2009, 03:50 PM
#16
2nd Gear Member
Thread Starter
Join Date: Jan 2007
Location: .
Posts: 253
it will fit a V6 yes if you want to convert to dual exhaust.. it's just the X-pipe.
also so everyone knows this is the same x-pipe used on the shelby gt
also so everyone knows this is the same x-pipe used on the shelby gt
Last edited by VistaBlue GT; 11-05-2009 at 03:53 PM.
11-05-2009, 09:55 PM
#17
2nd Gear Member
Join Date: Jun 2009
Location: WI
Posts: 184
its impossible for the pipe to fit both the shelby gt and a v6 the v6 has a smaller pipe diameter. So without reducers this won't fit my v6.
11-05-2009, 11:46 PM
#18
4th Gear Member
Join Date: Mar 2007
Location: Portland, OR
Posts: 1,747
Seller did say if you convert to dual (assuming from a gt) then it would work. He didnt say it would work with your V6 pipes.
I just wanted him to clarify if it cam from the frpp kit for the v6 or gt...