Polyurethane Grease
12-11-2008, 09:31 PM
#1
5th Gear Member
Thread Starter
Join Date: Aug 2007
Location: College Station, TX
Posts: 2,179
Polyurethane Grease
I've got some BMR Adjustable LCA's that area a Rod-End/Poly combo. I am planning on installing them this saturday and am wondering what kind of grease I need for the Poly bushings. I have one leftover packet of the grease I used on the bushings for my rear sway bar, but I'm not sure if it's enough for both LCA's or if I need to go pick up some more. If anyone can point me to a place in Houston that carries it or could just let me know what to look for, it would be greatly appreciated.
12-11-2008, 10:50 PM
#2
1st Gear Member
Join Date: Oct 2007
Location: Texas
Posts: 145
Howdy!
I recently re-greased my BMR setup using Mobile 1, Synthetic. It came in a shiney silver container; I believe other folks on here have used that as well, I have seen it at every major auto store such as Pep Boys and Auto Zone. The 14 oz tube only costs between 8-10 dollars. I'm sure there are other brands available as well, but this is the easiest to find. Remember it MUST be synthetic grease for poly bushings. Cheers.
I recently re-greased my BMR setup using Mobile 1, Synthetic. It came in a shiney silver container; I believe other folks on here have used that as well, I have seen it at every major auto store such as Pep Boys and Auto Zone. The 14 oz tube only costs between 8-10 dollars. I'm sure there are other brands available as well, but this is the easiest to find. Remember it MUST be synthetic grease for poly bushings. Cheers.
Thread
Thread Starter
Forum
Replies
Last Post
JonnyBlazeGT
4.6L (1996-2004 Modular) Mustang
3
08-09-2015 10:19 AM
