Notices
S197 Handling Section For everything suspension related, inlcuding brakes, tires, and wheels.
View Poll Results: WHAT VISCOSITY OIL ARE YOU RUNNING FOR ROAD COURSE DE APPLICATION ??
5W 20
9
45.00%
5W 30
8
40.00%
10w 30
1
5.00%
10w 40
1
5.00%
other
1
5.00%
Voters: 20. You may not vote on this poll

Oil viscosity ?

Thread Tools
 
Search this Thread
 
Old 12-01-2009, 05:10 PM
  #1  
14901490
2nd Gear Member
Thread Starter
 
14901490's Avatar
 
Join Date: Apr 2009
Location: webster, ny
Posts: 349
Default Oil viscosity ?

I am posting this here because I d like input from those who use their cars on road courses.

My typical DE is four 30 minute sessions on track - for 2-3 day events.

My question is - Do you stay with Fords recommendation of 5/20 weight or use something else?
Thx.
14901490 is offline  
Old 12-01-2009, 05:45 PM
  #2  
RodeoFlyer
4th Gear Member
 
RodeoFlyer's Avatar
 
Join Date: Jun 2006
Location: CA
Posts: 1,700
Default

I run 5w30, per a former FoMoCo engineer that worked on the 4.6 3v. He can't divulge much, but said he would NEVER run anything less than 30w in a modular engine. The 5w20 is simply to meet CAFE requirements.

I change mine after every event.
RodeoFlyer is offline  
Old 12-01-2009, 06:07 PM
  #3  
14901490
2nd Gear Member
Thread Starter
 
14901490's Avatar
 
Join Date: Apr 2009
Location: webster, ny
Posts: 349
Default

Originally Posted by RodeoFlyer
I run 5w30, per a former FoMoCo engineer that worked on the 4.6 3v. He can't divulge much, but said he would NEVER run anything less than 30w in a modular engine. The 5w20 is simply to meet CAFE requirements.

I change mine after every event.
Thanks, my inclination was 30 would be better
What is "CAFE requirements" ?? EPA stuff ?
14901490 is offline  
Old 12-01-2009, 06:26 PM
  #4  
RodeoFlyer
4th Gear Member
 
RodeoFlyer's Avatar
 
Join Date: Jun 2006
Location: CA
Posts: 1,700
Default

Federal fuel efficiency standards.
RodeoFlyer is offline  
Old 12-01-2009, 07:59 PM
  #5  
Argonaut
4th Gear Member
 
Argonaut's Avatar
 
Join Date: Oct 2007
Location: Harrisburg PA
Posts: 1,778
Default

Agree with Matt, run 30W. I did some testing a while back, sent samples into Blackstone lab. Mobil 1 5W30 after 5 track days was perfect, zero abnormal wear. I don't race like Matt does but for a DE guy I'm satisfied you can get 5 or 6 days per oil change.
Argonaut is offline  
Old 12-01-2009, 08:59 PM
  #6  
zero2sixd
1st Gear Member
 
zero2sixd's Avatar
 
Join Date: Dec 2007
Posts: 100
Default

I use 5w30 based off of the same information Rodeo posted (there is a long thread on this topic at corner carvers). I'm too scared to leave it in for more than one event, even though the Blackstone tests don't show any significant wear metals. It's not that expensive and the oil is easy to change on this car.

Last edited by zero2sixd; 12-01-2009 at 09:02 PM.
zero2sixd is offline  
Old 12-02-2009, 02:49 PM
  #7  
jayel579
2nd Gear Member
 
jayel579's Avatar
 
Join Date: Dec 2006
Location: Flanders, NJ
Posts: 408
Default

I run 5w30 as well. Oil is the life blood of your car and like zero2sixd said it is cheap and easy enough to change out. I autocross way more then track my car but I still put higher demands on the motor then usual street driving.
jayel579 is offline  
Old 12-02-2009, 09:48 PM
  #8  
Import_Slaya
2nd Gear Member
 
Import_Slaya's Avatar
 
Join Date: Apr 2008
Location:
Posts: 187
Default

Mobil 1 30w or 40w depending on what is in stock the weekend before a driver event. I sent a sample of the Motorcraft 5w-20 to Blackstone--otherwise fresh oil with only a single HDPE weekend and it had sheared to lighter than a 20w. Between that data point and the cc.com thread, I made the decision to never go below a 30w.
Import_Slaya is offline  
Old 12-03-2009, 10:21 PM
  #9  
Red06
2nd Gear Member
 
Red06's Avatar
 
Join Date: Jun 2006
Location: Farmington Hills, MI
Posts: 182
Default

Mobil 1 5W30 here.
Red06 is offline  
Old 12-04-2009, 09:27 AM
  #10  
14901490
2nd Gear Member
Thread Starter
 
14901490's Avatar
 
Join Date: Apr 2009
Location: webster, ny
Posts: 349
Default

Thanks all- sold on the 5 w 30 WEIGHT. However ..

Not sure i want to bring this up But -I personally am planning to switch FROM any & all Mobil products TO Companies who do not import Middle Eastern oil- such as BP Castrol Pennzoil Kwik fill Sunoco.Something to think about....

Last edited by 14901490; 12-04-2009 at 10:47 AM.
14901490 is offline  


Quick Reply: Oil viscosity ?



All times are GMT -5. The time now is 08:29 PM.