FAYS2 watts link with Roush Stage 3 rear sway bar ?
#11
Has anyone installed one of these lately? I am having issues adjusting my rods and setting it up. My first question is: Are your rods parallel to the ground and axle when the vehicle is on the ground or are they inverted “V” shaped?
The only way my rods are parallel to the ground and axle is if the rear end is lifted about 1” before hitting the bump stops onto the frame.
The only way my rods are parallel to the ground and axle is if the rear end is lifted about 1” before hitting the bump stops onto the frame.
#12
Your brackets need to rotate to lower the end links enough that the driver's side rod end doesn't hit the over-axle exhaust pipe. Depending on the ride height, you'll have some angle on the arms. So long as the angles are equal and opposite, the system will perform correctly.
Thanks for all the help guys.
Thread
Thread Starter
Forum
Replies
Last Post
Dragonus18
4.6L (1996-2004 Modular) Mustang
8
09-09-2015 01:21 AM