Rear suspension installed & question
#12
A little update. I still have to adjust the panhard bar and install the rear shocks. I work all damn day so it's hard to find time to do little things like that. Perhaps tomorrow night or Sunday morning.
I measured my ride height and it is currently almost perfectly level. It is about 28 7/8" at all corners...if my memory serves me correct. I have stock measurements written down, and now some with my rear installed and it lowered it about 7/8".
No increased NVH that I can tell. Rides smooth, especially with a full tank of gas. A lot less roll in the corners on the rear end, but I haven't pushed it too hard.
Thanks Asshat.
AmericanMuscle sells Whiteline stuff
I measured my ride height and it is currently almost perfectly level. It is about 28 7/8" at all corners...if my memory serves me correct. I have stock measurements written down, and now some with my rear installed and it lowered it about 7/8".
No increased NVH that I can tell. Rides smooth, especially with a full tank of gas. A lot less roll in the corners on the rear end, but I haven't pushed it too hard.
Derp, the panhard should move 1/2 inch to the drivers side helping your problem,
they are "on car" adjustable. Dink.
they are "on car" adjustable. Dink.
what is the source for those suspension parts?
Thread
Thread Starter
Forum
Replies
Last Post
NorthAmericanTuning
Vendor For Sale / Group Buy Classifieds
5
11-09-2016 11:45 AM
NorthAmericanTuning
S550 2015-2023 Mustang
3
03-18-2016 11:21 AM