2015 Wheels on a S197
#11
I have been looking at takeoff wheels and tires from 2015s, thinking about putting one of the 18in ones on my 2007 v6 Convertible.
Rims for Ford Mustang 2007
Bolt pattern 5x114.3
Diameter: 16'' - 22'';
Width (inches): 7 - 9.5;
Offset (mm): 30 - 38.
The 2015 wheels are:
235/50 R18 8Jx18 ET30 5x114.3
So the offset is on the lower end, but they should fit. Has anyone tried them?
Also, would the TPMS sensors off the 2015 work with a 2007?
I grabbed my numbers from here:
http://www.wheel-size.com/size/ford/mustang/2007/
http://www.wheel-size.com/size/ford/mustang/2015/
Rims for Ford Mustang 2007
Bolt pattern 5x114.3
Diameter: 16'' - 22'';
Width (inches): 7 - 9.5;
Offset (mm): 30 - 38.
The 2015 wheels are:
235/50 R18 8Jx18 ET30 5x114.3
So the offset is on the lower end, but they should fit. Has anyone tried them?
Also, would the TPMS sensors off the 2015 work with a 2007?
I grabbed my numbers from here:
http://www.wheel-size.com/size/ford/mustang/2007/
http://www.wheel-size.com/size/ford/mustang/2015/
+30 is really a SN95 offset. I know a lot of people run SN95 wheels on their S197, but SN95 offsets are not correct for the later car.
Norm
Last edited by Norm Peterson; 06-09-2015 at 07:13 PM.
#12
Thanks Norm.
I could have sworn I copied it straight from the page but I see what you are seeing now. They don't currently list the 16 inch option that the base v6's came on there anymore.
Ok, I will keep an eye out for bigger s197 lugs. Thanks.
I could have sworn I copied it straight from the page but I see what you are seeing now. They don't currently list the 16 inch option that the base v6's came on there anymore.
Ok, I will keep an eye out for bigger s197 lugs. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
5.0L GT S550 Tech
7
10-07-2015 04:01 AM
mungodrums
Suspension
0
09-07-2015 07:22 PM