Maine-iac

Hi All - Getting ready to install my Saleen Racecraft suspension kit (spring version, not coilovers) in my 09 GT. My camber plates are designed to re-use the rubber insulator/isolater that goes on the top of the strut between the spring and the strut mount. The Saleen springs don't have the rubber sleeve on the bottom coil either - they call for transferring the stock ones over. I want to leave my stock strut assemblies intact, so I need to get new insulators and sleeves. I have the part number for the sleeves, but can't find the part # for the insulators anywhere. The exploded diagrams by ford don't separate the isolator from the stock strut mount. HELP!!!

Maine-iac

C'mon guys n girls - I've gotta believe many have run into this same issue...

jwog666

did you try calling the dealer with your vin# thy can look it up for you

Maine-iac

Yes I did - they only were able to give me the part number for the entire stock hock mount. All I want is the rubber isolator that comes with it. Strange that it's hard to find....

macman45

I said F it and didn't run one. They don't do anything