tailsshrout

I have a 02 Torch red saleen. Im in the process of converting everything over to red and black. I peeled my silver saleen door stickers without measuring everything. So can another owner please run and measure the distance between stipes and the starting point of saleen and also the gap between the saleen stripes

jdivad

This is not my image, so I can't comment on it. To me... it looks like a 1999-04 with cut 1990-1993 SC spec stripes.

If folks have a busy weekend, we might be able to see if we have a 1999-04 decal install manual in the archives.

tailsshrout

thank you very much

scspeedster

The bottom of the chevrons are 5" from the door edge and the tops sit right at the crease, they are 1" apart.

The Saleen letters start or end 21 1/2" from the door edge.

I should have a template for you Monday, drop me a PM if yo ustill need it.

Did you get the chevrons from Saleen, they should have had a template.

scspeedster

Okay, I found out there wasn't a template -
Jess Albright from Saleen told me to line the top of the chevrons to the door line (crease) and move back 2 1/2", pretty much the same as the pic I post below.
Hope that helps.