manifold improvement for saleen sc281
#1
manifold improvement for saleen sc281
Guys
Will this work on a 04 SC281 saleen or is this a waste of time and money?
http://www.seanhylandmotorsport.com/...nduction.shtml
4.6 SOHC TYPHOON INTAKE (99+ GT)
54060 - Polished $785
54061 - Satin $630
This manifold has been chassis dyno proven to produce 21.5 more rear wheel hp than a stock manifold at 6,500 rpm. More torque from 4,000 rpm on up. This manifold features a three piece design that allows easy access to the bottom and the middle of the plenum chamber along with the runners for those who want to do their own additional port and plenum fine tuning. The manifold is a bolt-in replacement for all 1999 to 2004 engines and uses the stock alternator and all other stock engine accessories.
Will this work on a 04 SC281 saleen or is this a waste of time and money?
http://www.seanhylandmotorsport.com/...nduction.shtml
4.6 SOHC TYPHOON INTAKE (99+ GT)
54060 - Polished $785
54061 - Satin $630
This manifold has been chassis dyno proven to produce 21.5 more rear wheel hp than a stock manifold at 6,500 rpm. More torque from 4,000 rpm on up. This manifold features a three piece design that allows easy access to the bottom and the middle of the plenum chamber along with the runners for those who want to do their own additional port and plenum fine tuning. The manifold is a bolt-in replacement for all 1999 to 2004 engines and uses the stock alternator and all other stock engine accessories.
#3
RE: manifold improvement for saleen sc281
That's not going to mount to a saleen supercharger. If you are looking for more power why don't you just slap on a smaller sc pulley to crank up the boost? You will gain more than 20hp that way for alot less $$.
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM