Go Back   MustangForums.com > Search Forums
Sign in using an external account
Register Forgot Password?
Search


Welcome to Mustang Forums!
Welcome to Mustang Forums.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!


Showing results 1 to 25 of 500
Search took 0.75 seconds.
Search: Posts Made By: jlg2002
Forum: Classic Mustangs (Tech) 05-19-2014, 04:00 PM
Replies: 3
Views: 419
Posted By jlg2002
Step 1: make sure the brown wire is not connected...

Step 1: make sure the brown wire is not connected to the starter relay S terminal. (the red blue wire should go to the S terminal)
Step 2: Put the car in N , turn the ign key on to start- does it...
Forum: Classic Mustangs (Tech) 05-08-2014, 04:09 PM
Replies: 6
Views: 319
Posted By jlg2002
OP, the steering wheel (column side) also has...

OP,
the steering wheel (column side) also has an activation cam on it that engages into the TS switch cams. you need to look at that too.
Forum: Classic Mustangs (Tech) 04-15-2014, 04:14 PM
Replies: 4
Views: 191
Posted By jlg2002
There shouldn't have been any leaks with the...

There shouldn't have been any leaks with the pulley face down on an oem c'pressor. Unless it ran out of the hose ports.
I found my old service manual from when I used to do these: The York...
Forum: Classic Mustangs (Tech) 04-15-2014, 04:00 PM
Replies: 26
Views: 1,434
Posted By jlg2002
I used OEM replacements on my 66. I think for the...

I used OEM replacements on my 66. I think for the money, if your looking for a one stop solution, the painless kit is probably the best one out there form a quality and technical perspective if your...
Forum: Classic Mustangs (Tech) 02-21-2014, 04:16 PM
Replies: 2
Views: 181
Posted By jlg2002
I have not found just lower ball joints either....

I have not found just lower ball joints either. You can buy dust boots and replace those or entire control arms with new Ball joints. Moog is a brand that has decent quality and is available at...
Forum: Classic Mustangs (Tech) 01-24-2014, 03:58 PM
Replies: 7
Views: 428
Posted By jlg2002
Yep I had to open in a private window- I see what...

Yep I had to open in a private window- I see what is being discussed now. I agree with your comments. One way to isolate (electrical tape) the unused wires back into the wire harness so they don't...
Forum: Classic Mustangs (Tech) 01-24-2014, 03:52 PM
Replies: 7
Views: 428
Posted By jlg2002
Thanks for the info. you still at NAPA?

Thanks for the info. you still at NAPA?
Forum: Classic Mustangs (Tech) 01-21-2014, 04:01 PM
Replies: 7
Views: 428
Posted By jlg2002
Your photo doesn't open correctly and if you have...

Your photo doesn't open correctly and if you have a true 72, your voltage regulator should have 4 terminals not 5 or 6. Electronic replacement units are the only replacement types.
Forum: Classic Mustangs (Tech) 01-09-2014, 04:15 PM
Replies: 1
Views: 256
Posted By jlg2002
These are typically press fit and available here:...

These are typically press fit and available here:
http://www.alexsparts.com/products.php?product=WATER-BYPASS-TUBE%2C-NIPPLE-SBF%2C-BBF%2C-351C%2C-351{47}400M-%26-FE
Forum: Classic Mustangs (Tech) 12-16-2013, 04:26 PM
Replies: 8
Views: 531
Posted By jlg2002
I concur with Barnett, we used to inspect those...

I concur with Barnett, we used to inspect those cardboard tubes as part of the smog testing we did out here in calif. Most were somehow dinged up or torn and of course they were dealer only items.
Forum: Classic Mustangs (Tech) 12-12-2013, 06:38 PM
Replies: 11
Views: 683
Posted By jlg2002
0.035 is the normal max gap for stock street...

0.035 is the normal max gap for stock street cars. You can go down to .032 but not sure that you'll see much benefit.
Forum: Classic Mustangs (Tech) 11-22-2013, 03:47 PM
Replies: 5
Views: 351
Posted By jlg2002
The code J says 302. The casting date says its a...

The code J says 302. The casting date says its a SB ford engine block built in 1967 on July 27 and it is a 302 block. You can pull a valve cover and look at the head embosement for 302 or under an...
Forum: Classic Mustangs (Tech) 11-22-2013, 03:28 PM
Replies: 4
Views: 335
Posted By jlg2002
ATF line Clamp need to be unhooked from the engine

ATF line Clamp need to be unhooked from the engine
Forum: Classic Mustangs (Tech) 11-07-2013, 06:03 PM
Replies: 2
Views: 395
Posted By jlg2002
For the 1973Mustang model Ford uses the...

For the 1973Mustang model Ford uses the Alternator "S" terminal as the source of power for the electric choke and ground directly on the carb.
Forum: Classic Mustangs (Tech) 11-05-2013, 04:03 PM
Replies: 7
Views: 413
Posted By jlg2002
At some point they stopped calling engines by Cu...

At some point they stopped calling engines by Cu inches and transferred to liters. I think in the late 80's or 90's - maybe some one else here knows. I'm not sure exactly when I think the roller...
Forum: Classic Mustangs (Tech) 11-04-2013, 04:02 PM
Replies: 7
Views: 413
Posted By jlg2002
http://www.allfordmustangs.com/forums/attachments/...

http://www.allfordmustangs.com/forums/attachments/5-0l-talk/40526d1204426804-ford-small-block-casting-numbers-engine-block-casting-numbers.jpg
Forum: Classic Mustangs (Tech) 11-04-2013, 04:02 PM
Replies: 7
Views: 413
Posted By jlg2002
What else do you need to know? BTW ford...

What else do you need to know?

BTW ford engines have the casting info on the pass side just above the starter motor. The number should be D2OE-6015-AE or similar. the number I show is for a 72...
Forum: Classic Mustangs (Tech) 11-01-2013, 03:40 PM
Replies: 1
Views: 316
Posted By jlg2002
If you want the affected circuits designed from...

If you want the affected circuits designed from the ground up PM me and we'll talk about it. If you want to just modify the stock harnesses that's another story - not sure why you want fuses in the...
Forum: Classic Mustangs (Tech) 10-30-2013, 04:07 PM
Replies: 5
Views: 312
Posted By jlg2002
Going with the assumption that the engine is not...

Going with the assumption that the engine is not cranking (please correct if it is cranking but not lightin' off)

First question is:
Did the T5 install include a nuetral safety switch install? If...
Forum: Classic Mustangs (Tech) 10-24-2013, 04:05 PM
Replies: 10
Views: 1,021
Posted By jlg2002
It can also be the brake adjustment if the backs...

It can also be the brake adjustment if the backs (or fronts) are still drums. If not, along the same lines as 67mustang302 states-it's the amount of fluid required to engage the pad from pistons...
Forum: Classic Mustangs (Tech) 10-24-2013, 03:59 PM
Replies: 2
Views: 317
Posted By jlg2002
As it's wired it should work. However, not if the...

As it's wired it should work. However, not if the ballast resistor on the side not attached to the coil doesn't have battery voltage on it with the ign key in run (will require a DVM to answer). If...
Forum: Classic Mustangs (Tech) 10-22-2013, 06:32 PM
Replies: 9
Views: 425
Posted By jlg2002
Stepman, primary coil R= 0.5 to 3 ohms depends...

Stepman,
primary coil R= 0.5 to 3 ohms depends on coil. no specs on secondary but your number looks ok.
9 Vdc is pretty good for a resistor wire circuit. Pertronix recommends that you not exceed 8...
Forum: Classic Mustangs (Tech) 10-16-2013, 04:06 PM
Replies: 9
Views: 425
Posted By jlg2002
The starter relay has a wire attached that goes...

The starter relay has a wire attached that goes to the ign circuit to allow for battery voltage to the coil during cranking. If just this set of contacts stick in the relay, it will cause the problem...
Forum: Classic Mustangs (Tech) 10-14-2013, 03:15 PM
Replies: 4
Views: 550
Posted By jlg2002
Starfury is right on. To prevent confusion,...

Starfury is right on. To prevent confusion, sometime in the future you may want to remove the Vreg from the car - it is not necessary once the 1 wire system is put in. Also if you have upgraded the...
Forum: Classic Mustangs (Tech) 10-14-2013, 03:07 PM
Replies: 5
Views: 416
Posted By jlg2002
The video is very accurate and James, I've never...

The video is very accurate and James, I've never seen the situation that you've explained in my active years as an auto electrical tech. The one thing the guy in the video does wrong (IMO) is he...
Showing results 1 to 25 of 500

 
Forum Jump
Advertising

Featured Sponsors
Vendor Directory
New Sponsors
All times are GMT -5. The time now is 01:19 AM.

© Internet Brands, Inc.


This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
Emails Backup