Go Back   MustangForums.com > Search Forums
Sign in using an external account
Register Forgot Password?
Search


Welcome to Mustang Forums!
Welcome to Mustang Forums.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!


Showing results 1 to 25 of 79
Search took 0.07 seconds.
Search: Posts Made By: Stangbass
Forum: 2010-current S197 Appearance Section 05-21-2015, 10:45 PM
Replies: 3
Views: 255
Posted By Stangbass
Google my friend. You're welcome....

Google my friend. You're welcome....
Forum: 4.0L V6 Technical Discussions 05-20-2015, 03:32 PM
Replies: 3
Views: 103
Posted By Stangbass
Loose wheel splash shield would be my guess....

Loose wheel splash shield would be my guess. Check all those plastic bits and pieces in the front end and wheel well and make sure they are snug. Broken retention clips can cause them to loosen up...
Forum: V6 S197 General Discussion 05-19-2015, 06:45 PM
Replies: 18
Views: 571
Posted By Stangbass
I'd just go Timken.

I'd just go Timken.
Forum: 4.0L V6 Technical Discussions 05-05-2015, 04:04 PM
Replies: 3
Views: 193
Posted By Stangbass
http://i692.photobucket.com/albums/vv288/al-kellyi...

http://i692.photobucket.com/albums/vv288/al-kellyii/DSCN3564_zps18db2b1b.jpg (http://s692.photobucket.com/user/al-kellyii/media/DSCN3564_zps18db2b1b.jpg.html)
Forum: V6 S197 General Discussion 04-29-2015, 10:26 PM
Replies: 4
Views: 313
Posted By Stangbass
Twincharging is normally done with a positive...

Twincharging is normally done with a positive displacement blower and a turbo. Using a centri doesn't make much sense. It would be far easier to do twin turbos.

If you're serious about it though,...
Forum: 2010-current S197 Appearance Section 04-22-2015, 07:22 PM
Replies: 3
Views: 244
Posted By Stangbass
Whoever installed them did a hack job. Bi-xenon...

Whoever installed them did a hack job. Bi-xenon projectors use a single bulb and a shield to switch between Hi and Low beams. When the low beams are on a Z shaped shield is raised which creates a cut...
Forum: V6 S197 General Discussion 04-20-2015, 10:06 PM
Replies: 3
Views: 171
Posted By Stangbass
Make sure you got the correct part for your...

Make sure you got the correct part for your production date. Don't quote me, but I believe 2007 is when they switched flywheels to the single mass to the dual mass.
Forum: 2005 - 2014 Mustangs 04-12-2015, 12:50 PM
Replies: 116
Views: 8,879
Posted By Stangbass
Got my old boat anchor 4.0L late 2009. Still...

Got my old boat anchor 4.0L late 2009. Still going strong rolling up on 70K. Daily driven.
http://i692.photobucket.com/albums/vv288/al-kellyii/must1.jpg...
Forum: 4.0L V6 Technical Discussions 03-26-2015, 02:26 PM
Replies: 8
Views: 310
Posted By Stangbass
Mine needed the cobra flange. Supposed to have...

Mine needed the cobra flange. Supposed to have come off a 2012 Roush Package 3.73's.
I just checked ebay they've got 2 rear ends from 2012's one BOSS(3.73) and GT(3.15). Both of them would need the...
Forum: 4.0L V6 Technical Discussions 03-17-2015, 10:04 PM
Replies: 6
Views: 218
Posted By Stangbass
I'd check for vacuum leak.

I'd check for vacuum leak.
Forum: 2005 - 2014 Mustangs 02-13-2015, 07:56 AM
Replies: 10
Views: 469
Posted By Stangbass
That is the method I used, slow pump and release....

That is the method I used, slow pump and release. My understanding is that you need a scan tool to bleed the ABS system.
Forum: 2005 - 2014 Mustangs 02-12-2015, 06:20 PM
Replies: 10
Views: 469
Posted By Stangbass
Here's the video I referenced. The tube is dry...

Here's the video I referenced. The tube is dry when you start. It basically becomes an extension of the brake line when you open the bleeder and pump it with fluid. By running the tubing up over the...
Forum: 2005 - 2014 Mustangs 02-12-2015, 08:25 AM
Replies: 10
Views: 469
Posted By Stangbass
I bled my brakes with a 2 liter pop bottle and...

I bled my brakes with a 2 liter pop bottle and some clear tubing from lowes.

Put a little grease around the threads of the bleeder. Attach the tubing to the bleeder nipple. Make sure the hose us...
Forum: 5.0L V8 Technical Discussions 02-04-2015, 09:56 PM
Replies: 10
Views: 779
Posted By Stangbass
I just installed a set on my 2010. There was...

I just installed a set on my 2010. There was plenty of room on my car to install on the door panel. Also there was no puddle light harness on my car, so I tapped the door ajar switch and ground from...
Forum: 5.0L V8 Technical Discussions 01-26-2015, 07:20 AM
Replies: 10
Views: 779
Posted By Stangbass
That's awesome. I didn't know such a thing...

That's awesome. I didn't know such a thing existed.
Forum: 5.0L V8 Technical Discussions 01-17-2015, 06:34 AM
Replies: 10
Views: 623
Posted By Stangbass
I had to run octane booster with my Bama tune I...

I had to run octane booster with my Bama tune I was getting detonation under part throttle. I ran NOS from autozone. Stopped my detonation but fouled my plugs within 3 tanks. When I pulled the plugs...
Forum: S197 Handling Section 01-12-2015, 08:53 PM
Replies: 18
Views: 769
Posted By Stangbass
I replaced my lines with russels. Also flushed...

I replaced my lines with russels. Also flushed the system with dot-4 and bleed the system out by myself with 2 liter soda bottle and some clear tubing.

Replaced all 4 lines first. Then sucked out...
Forum: 2005 - 2014 Mustangs 01-11-2015, 10:15 PM
Replies: 2
Views: 223
Posted By Stangbass
http://www.americanmuscle.com/spec-billet-flywheel...

http://www.americanmuscle.com/spec-billet-flywheel-0709-cust-install.html

http://iihs.net/fsm/?dir=259
Forum: S197 Handling Section 09-06-2014, 07:43 PM
Replies: 4
Views: 1,022
Posted By Stangbass
Post Installing BMR poly differential bushing.

Well my rear diff bushing was ripped and causing some pretty nasty clunking, so I decided to replace it with the BMR EN001.

After some research it seemed that people normally had a serious time...
Forum: 4.0L V6 Technical Discussions 08-19-2014, 07:21 PM
Replies: 5
Views: 323
Posted By Stangbass
I did it myself, a second set of hands would...

I did it myself, a second set of hands would help, but it's manageable by yourself if you've got a rolling floor jack.

Probably the roughest aspect of the install is just the fact that everything...
Forum: 4.0L V6 Technical Discussions 08-19-2014, 01:44 PM
Replies: 5
Views: 323
Posted By Stangbass
Pb-Blaster, 12 point 12mm socket, breaker bar. ...

Pb-Blaster, 12 point 12mm socket, breaker bar.

-In neutral, rotate the DS until two bolts are on bottom.
-Set parking brake or put car in gear.
-Unfasten two bolts
-Release parking brake or...
Forum: 4.0L V6 Technical Discussions 07-27-2014, 09:04 PM
Replies: 13
Views: 1,090
Posted By Stangbass
Carry on...............:icon_naughty:

Carry on...............:icon_naughty:
Forum: 4.0L V6 Technical Discussions 07-27-2014, 08:50 PM
Replies: 13
Views: 1,090
Posted By Stangbass
SHHHHHHHHHHHHH

SHHHHHHHHHHHHH
Forum: V6 S197 General Discussion 07-15-2014, 02:16 PM
Replies: 17
Views: 5,620
Posted By Stangbass
Wouldn't it make sense to find out WHY the car is...

Wouldn't it make sense to find out WHY the car is burning through clutches so fast. If there was a common issue among manual 4.0l's getting on 6k out of a clutch there would be hundreds of threads on...
Forum: V6 S197 General Discussion 07-09-2014, 09:44 PM
Replies: 13
Views: 1,277
Posted By Stangbass
I'd recommend the MAC prochamber mid pipe with a...

I'd recommend the MAC prochamber mid pipe with a mid muffler setup. I think this setup would be hard to beat, but I'm a little bias.


First was a rev and slow take off
Second was goosing the...
Showing results 1 to 25 of 79

 
Forum Jump
Advertising

Featured Sponsors
Vendor Directory
New Sponsors
All times are GMT -5. The time now is 12:54 AM.

© Internet Brands, Inc.


This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
Emails Backup