MustangForums.com - Search Results

Go Back   MustangForums.com > Search Forums
Search


Showing results 1 to 25 of 212
Search took 0.23 seconds.
Search: Posts Made By: mongolchuck
Forum: 5.0L (1979-1995) Mustang 07-19-2016, 12:19 PM
Replies: 6
Views: 258
Posted By mongolchuck
Sent you a pm

Sent you a pm
Forum: 5.0L (1979-1995) Mustang 07-18-2016, 02:18 PM
Replies: 2
Views: 146
Posted By mongolchuck
I have those frpp headers on my gt40p heads and...

I have those frpp headers on my gt40p heads and they do fit great with no interference. I've also heard of using bbk and Mac with 90° boots on a few of the plug wires.
Forum: 5.0L (1979-1995) Mustang 07-18-2016, 09:22 AM
Replies: 6
Views: 258
Posted By mongolchuck
Those Marchal fog lights are tough to come by. I...

Those Marchal fog lights are tough to come by. I had to get some off ebay for my 85 about 6 years ago. I might still have one laying around. I'll check when I get home.
Forum: 5.0L (1979-1995) Mustang 07-14-2016, 11:41 PM
Replies: 9
Views: 368
Posted By mongolchuck
Where Does The PCV Hose Go To?

Here's a vac diagram of a speed density car. Since you only have one port to work with you'll need a few more tees. Is there a vac port on your throttle body?...
Forum: 5.0L (1979-1995) Mustang 07-14-2016, 10:03 PM
Replies: 9
Views: 368
Posted By mongolchuck
Where Does The PCV Hose Go To?

I'm basing all this on stock intakes but yeah what you've drawn is what I'd do. The baro, or MAP, sensor gets its vacuum from the intake on stock non maf applications. The firewall tree feeds the...
Forum: 5.0L (1979-1995) Mustang 07-12-2016, 05:00 PM
Replies: 5
Views: 255
Posted By mongolchuck
First thing verify your timing, firing order and...

First thing verify your timing, firing order and vacuum lines. Is your coolant level the same? White smoke usually indicates coolant getting in to the combustion chambers.
Forum: 5.0L (1979-1995) Mustang 07-10-2016, 11:56 AM
Replies: 9
Views: 368
Posted By mongolchuck
The line off the pcv ties in to the vac off the...

The line off the pcv ties in to the vac off the upper intake and then also tees to another line in the intake above the driver side (left) valve cover in stock applications. You just want it to have...
Forum: 5.0L (1979-1995) Mustang 07-10-2016, 11:04 AM
Replies: 9
Views: 368
Posted By mongolchuck
The stock pcv application runs from the rear of...

The stock pcv application runs from the rear of the lower intake. That is where the pcv valve is located. I know it says the vac tree is eliminated but I would run a big line from the 90 to your vac...
Forum: 5.0L (1979-1995) Mustang 07-08-2016, 09:16 AM
Replies: 9
Views: 368
Posted By mongolchuck
If it had open breather oil caps a blocked pcv...

If it had open breather oil caps a blocked pcv wouldn't have caused a problem, you would just smell crankcase fumes. The pcv valve mounts in the back of the intake with the hose running to the back...
Forum: 5.0L (1979-1995) Mustang 06-29-2016, 12:04 PM
Replies: 8
Views: 217
Posted By mongolchuck
When you jump across the solenoid is the key on?...

When you jump across the solenoid is the key on? If the key is off when you do that it will crank and not fire.
Forum: 5.0L (1979-1995) Mustang 06-28-2016, 10:47 PM
Replies: 8
Views: 217
Posted By mongolchuck
Check your fuel pressure and confirm spark. Can...

Check your fuel pressure and confirm spark. Can you hear the fuel pump run for a second or two when you turn the key to on? If the water got the carpet wet it could have easily gotten to the fuel...
Forum: 5.0L (1979-1995) Mustang 06-28-2016, 09:45 PM
Replies: 8
Views: 217
Posted By mongolchuck
If it got to the floor boards it got to the...

If it got to the floor boards it got to the starter. It sits low on the passenger side and it doesn't take much to lock up the starter. Give it a few taps with a hammer and see if it will turn over.
Forum: 5.0L (1979-1995) Mustang 06-20-2016, 09:20 AM
Replies: 10
Views: 551
Posted By mongolchuck
One thing I do to get oil flowing, especially to...

One thing I do to get oil flowing, especially to the lifters, is to use a drill on a lower speed to turn the oil pump driveshaft. You have to take the dizzy out obviously but it gets oil primed...
Forum: 2010-current S197 Appearance Section 06-20-2016, 09:17 AM
Replies: 19
Views: 1,328
Posted By mongolchuck
*deleted*

*deleted*
Forum: 5.0L (1979-1995) Mustang 06-18-2016, 10:48 AM
Replies: 3
Views: 210
Posted By mongolchuck
What brakes are you running up front now? And...

What brakes are you running up front now? And what are your plans to do the 5 lug swap? Just 5 lug rotors? If you are still stock up front you'll need at least 87+ spindles and struts. The four eye...
Forum: 5.0L (1979-1995) Mustang 06-07-2016, 03:17 PM
Replies: 4
Views: 212
Posted By mongolchuck
30 lb injectors are too big. Usually your...

30 lb injectors are too big. Usually your computer can compensate but it also has limits. When you say intake are you talking about the manifold or the air tube to the throttle body? The tract from...
Forum: 5.0L (1979-1995) Mustang 06-04-2016, 11:15 AM
Replies: 9
Views: 342
Posted By mongolchuck
Chances are its the tfi module on your...

Chances are its the tfi module on your distributer acting up. Very common problem. So common they moved it on the sn95 cars to help keep it cooler.
Forum: 5.0L (1979-1995) Mustang 06-02-2016, 10:05 AM
Replies: 2
Views: 147
Posted By mongolchuck
Did you replace the valve springs with the valve...

Did you replace the valve springs with the valve job? While not providing tons of the lift the ho cam is more aggressive than the explorer cam. First thing though is check the torque again on your...
Forum: 5.0L (1979-1995) Mustang 05-31-2016, 10:04 AM
Replies: 8
Views: 268
Posted By mongolchuck
I used to see pumps burned up after the owners...

I used to see pumps burned up after the owners had just fueled them. Asked a parts rep once and he said the cold fuel hitting a hot pump can seize them in an instant, especially if it's the habit of...
Forum: 5.0L (1979-1995) Mustang 05-28-2016, 10:04 AM
Replies: 8
Views: 428
Posted By mongolchuck
Check the wire to the solenoid first. If it has...

Check the wire to the solenoid first. If it has power when you turn the key then your solenoid is dead.
Forum: 5.0L General Discussion 05-16-2016, 08:31 AM
Replies: 12
Views: 643
Posted By mongolchuck
You'll need gears and some transmission...

You'll need gears and some transmission massaging. The aod does not do even occasional track work well. As has been said on the forum many times, cheap fast or good. You can only have two of the...
Forum: 5.0L General Discussion 05-14-2016, 09:11 AM
Replies: 12
Views: 643
Posted By mongolchuck
If you can pick some up cheap, meaning under $100...

If you can pick some up cheap, meaning under $100 then do it. They do add some power with some other supporting mods like intake and throttle body. But if you're spending more save up for some...
Forum: 5.0L (1979-1995) Mustang 05-08-2016, 10:41 AM
Replies: 3
Views: 205
Posted By mongolchuck
If you still have cats you should go platinum....

If you still have cats you should go platinum. They are less likely to foul and damage your cats. Nothing extravagant just single platinum will do.
Forum: Parts For Sale 05-08-2016, 10:35 AM
Replies: 3
Views: 636
Posted By mongolchuck
Wrong post

Wrong post
Forum: 5.0L (1979-1995) Mustang 05-04-2016, 12:05 PM
Replies: 11
Views: 602
Posted By mongolchuck
Is your trans stock? A good shift kit will get...

Is your trans stock? A good shift kit will get you higher shift points and firmer shifts.
Showing results 1 to 25 of 212

 
Forum Jump
 

All times are GMT -5. The time now is 12:35 PM.



This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company