top end questions. advice appreciated
#1
top end questions. advice appreciated
Hey i have 88 h.o motor that is speed density that i bough few weeks ago as a fixer upper, it has a 303 cam not sure which one and long tubes. cylinder 3's plug has oil on it causing misfire its not my rings so im assuming its my head so im taking off the intakes converting it to carb and slapping gt40p heads on it will my cam work well with these heads and will my longtubes mount back up no problem or will i have to change lifters etc. Because of the cam, and the main question is whats is the best intake for these heads and my setup not looking for all out horsepower but just a combo that works good together any advice is greatly appreciated
Thread
Thread Starter
Forum
Replies
Last Post
Calizic
4.6L (1996-2004 Modular) Mustang
5
08-28-2015 01:46 PM
panic
S550 2015-2023 Mustang
0
08-25-2015 09:34 AM
Choppertwo
3.7L V6 Technical Discussions
7
08-18-2015 02:21 PM