DIY Strut Tower Brace
#1
DIY Strut Tower Brace
New to forum, just looking to see if anyone has done a DIY strut tower brace and if so do you have the plans or specs. I like to fab stuff myself and would love to try this on my own and add a little flair to it.
#3
#4
I'm in Indiana. I'll ship it to you for $70. It's really just cosmetic. Some guys take it off to save weight. If you put a CobraJet intake on, you'll need 5mm spacers to make it fit. If you later on add the GT500 upper strut mounts, the bolts are too short for the spacers. That's why it's hanging in my garage.
#6
http://s302.photobucket.com/user/z28...ddc13.jpg.html
Looks like it will fit. Aftermarket upper strut mounts are only a problem if you also have a 5.0 with CobraJet intake,which requires the 5mm spacers.
Looks like it will fit. Aftermarket upper strut mounts are only a problem if you also have a 5.0 with CobraJet intake,which requires the 5mm spacers.
Thread
Thread Starter
Forum
Replies
Last Post
jordanair45
S197 Handling Section
2
08-13-2016 01:19 PM
dlee
4.6L (1996-2004 Modular) Mustang
7
07-30-2016 01:40 PM