96-01 cobra trap speeds?
#11
RE: 96-01 cobra trap speeds?
ORIGINAL: Stang9946
Stock you should dyno around 270-272rwhp....that's a hell of a gain on those few things
ORIGINAL: Rusmisel01GT
couple mods like intake + catback? you have over 300 rwhp... That seems like quite a bit over stock.
ORIGINAL: Ahnial8u
I am trapping almost 103 with a couple mods.
I am trapping almost 103 with a couple mods.
Well figure maybe 12-15 RWHP with the Ehaust and maybe 18-20 RWHP with the Dynotune??? I dunno And at the time of the Dyno I had and still do the dirty *** stock style Air filter and some crap plugs that I threw in my car in the middle of February. So there's probably some left in it.
#13
RE: 96-01 cobra trap speeds?
My friend with a 01 Cobra with a catback and CAI, was trapping 105 and he ran a best of 13.6 on a really hot day, i was trapping 100. A 96 Cobra with a catback was trapping 100 as well, and a 03 Mach 1 with catback and predator tune was trapping 103. All this was in 90 degree weather and 90% humidity.
#14
RE: 96-01 cobra trap speeds?
ORIGINAL: 01snake
i trapped at 107 with minor mod's
no traction thru 1st and 2nd i was on street tires
best time was 13.3 first time at track
i trapped at 107 with minor mod's
no traction thru 1st and 2nd i was on street tires
best time was 13.3 first time at track
#16
RE: 96-01 cobra trap speeds?
ORIGINAL: POISND U
Let me see if I remember.....
A ported upper intake,K&N,catback and a dynotune....
Oh yeah, stainless tips too....
Did I forget anything?
ORIGINAL: MustangGT99
01snake, what type of "minor mods" do you have
01snake, what type of "minor mods" do you have
A ported upper intake,K&N,catback and a dynotune....
Oh yeah, stainless tips too....
Did I forget anything?
u/d pullies, diablo chip, o/r x, 3.73's, eibach spring's (1.5' drop), steeda pro shifter, hawk hps brake pads, nitto 555 etream tires, subframe connectors, bbk strut tower
dyno sheet reads 319 rwhp
some ppl *cough* dont believe me but on other forums people have same mods and putting same power
Thread
Thread Starter
Forum
Replies
Last Post
BeatnikFink
New Member Area
6
10-01-2015 08:00 PM