You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I've got a 98 Cobra and am in the middle of putting a D1SC procharger on it, have it almost finished but dont have the rubber hose that allows the air to run from the charger to the engine...
Would I be able to get this hose at any autoparts store as long as its high pressre? or would it be best to call up procharger and get the part through them?
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
I've got a 98 Cobra and am in the middle of putting a D1SC procharger on it, have it almost finished but dont have the rubber hose that allows the air to run from the charger to the engine...
Would I be able to get this hose at any autoparts store as long as its high pressre? or would it be best to call up procharger and get the part through them?
I would just order the right piece from Procharger and have them overnight it to you if you want it right away.
__________________
2004 Cobra (Comp. Orange)
#3467 of 3768
-Tuned by Bob Kurgan
-485rwhp/506rwtq
2003 Ford Focus SVT
*Stock
2007 Mustang GT = Sold
2004 Mach1 = Sold
2001 Mustang GT = Sold
or u could just half ass it like i would and do it the wrong way the 1st time and just get any old hose from the auto store n then when it messes up, u can curse it out and then finally call them and get the right piece lol : )
or u could just half ass it like i would and do it the wrong way the 1st time and just get any old hose from the auto store n then when it messes up, u can curse it out and then finally call them and get the right piece lol : )
LMFAO.....Good times with you car!
__________________
2004 Cobra (Comp. Orange)
#3467 of 3768
-Tuned by Bob Kurgan
-485rwhp/506rwtq
2003 Ford Focus SVT
*Stock
2007 Mustang GT = Sold
2004 Mach1 = Sold
2001 Mustang GT = Sold
i found that diesel repair shops have those hose couplers too that are made by gates, the same manufacture of the ones that come with the procharger, my only complaint is that the hose clamps that come with the kit are crappy, i had probs with them staying on so i had to run 2 of them at certain spots to keep the hoses on.
__________________
35 anv GT (4.6 2v P1-SC 483hp/454ft-lbs @8psi)
06' daytona 675 (110rwhp)
89' jeep cherokee =) hp
03 cobra vert (429hp/421ft-lbs w/ 2.8 pulley)
06 suzuki ltr 450 (47whp)
the procharger on my 95 i used home depot steel reinforced rubber hose and never had a problem with, other then the fact you have to use a hacksaw to hut it the right length. the autozone ones will bubble and flex
__________________
95 gt vert: 331 stroker, d-1sc @ 10 lbs,582 rwhp 511 ft. Tq
2003 sonic blue cobra KB 2.2 @ 19psi,supporting mod, solid 8.8 601 rwhp 584 rwtq
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
Procharged cobra.. help??
