You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
So... I just put a clutch cable and quadrant and seat bracket extenders in my car. But now after like 4 seconds of running it it blows the #9 fuse which is the flashers. I've replaced the fuse like 4 times and even tried a 20 amp, instead of a 15, to see if it would blow it, and it did. All the bulbs work still, but none of the blinking lights work and the brake lights will not come on. I was wondering where the wires ran so I could look for a short or a ground issue. I'm pretty sure I didn't brake any ground wires, I did have to disconnect the wire next to the oil filter but I put it back on tight. Maybe I crimped a wire under the seat or something? I can't figure it out... Any help would be amazing.
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
Flasher and Brake light fuse issues... Help!
