Got the 4# Lower on....
#1
Got the 4# Lower on....
So I got around to installing the Metco 4# Lower yesterday....Getting the stock lower pulley was a pain....but taken care of!!!!
I test fit everything yesterday, BUT I'm going to install a new Ford Alternator!
I also install the new 100 mm Aux pulley and the 3.2" Alt Pulley (to test fit) .... ended up needing a 79" belt with my 2.93" upper .... going to get a 78.5" belt for the 2.76" upper (I had 4 belts to test with)...
Install took about 5 hours.....
Here's a few pics (sorry, they are cell phone)
I test fit everything yesterday, BUT I'm going to install a new Ford Alternator!
I also install the new 100 mm Aux pulley and the 3.2" Alt Pulley (to test fit) .... ended up needing a 79" belt with my 2.93" upper .... going to get a 78.5" belt for the 2.76" upper (I had 4 belts to test with)...
Install took about 5 hours.....
Here's a few pics (sorry, they are cell phone)
Last edited by Timspony; 01-15-2012 at 09:51 AM.
#2
Got my MM clutch quad and fire wall adjuster on over the weekend .... next up I'm getting ready for E85 with GT pumps, mod. FPDM & PPRV delete kit ... here's a link to the kit.
http://dagostinoracing.com/index.php...ducts_id=12182
E85 power!!
http://dagostinoracing.com/index.php...ducts_id=12182
E85 power!!
#7
Got some more work done...Install a JLT Oil Separator ....Pulling vacuum from both valve covers into the Oil Separator for the E85 mod!! ... GT Pumps next!!!!
Also install Kim's new BF 2.76" upper (BF IRS brace next, sitting on the work bench)....
Oh ya, put on the Bogart GT Wheels!!!! ....What you think (sorry about the cell pics)
Also install Kim's new BF 2.76" upper (BF IRS brace next, sitting on the work bench)....
Oh ya, put on the Bogart GT Wheels!!!! ....What you think (sorry about the cell pics)