Bama Performance sets record for WORLDS FASTEST NA 2015 Mustang GT!
#1
Bama Performance sets record for WORLDS FASTEST NA 2015 Mustang GT!
We're very excited to announce that Bama Performance just took our Black 2015 Performance Pack equipped GT down the track and nailed an 11.2 @ 121mph on their first pass setting a world record for the fastest bolt on 2015 Mustang GT!
As soon as we received our fleet of S550's Bama Performance started tearing into the Coyote as well as our EcoBoost and the proof is in the pudding that Bama is here to dominate the 2015 Mustang!
What's really impressive is that they we're able to do this with stock IRS bushings as well as stock Halfshafts leading us to believe that Ford's IRS is actually pretty stout! Here's some of the mods that were used:
Full Exhaust
JLT Cold Air Intake
Bama 93 Track Tune
Custom Suspension Mods
Mild Weight Reduction
Slicks and Skinnies
Rest assured this isn't the last we're going to be hearing of Bama's efforts on our 2015 Mustang's and I can only anticipate when they'll be in the 10's!
Stay Tuned and for all things Mustang keep it right here at AmericanMuscle!
Last edited by AMAlexLazarus; 11-16-2014 at 11:00 AM.
#2
Wow... impressive. That's a good second and a half with bolt-ons and a tune. Is the "track tune" something you could daily drive without a hit to the engine's life? Or is it a maxed out tune on the ragged edge?
#3
Alex
#7
Jim & Ward-Agreed! We're working hard along with Bama to dial the car in. And here's what we're working with so far!
Exhaust:
Custom 1 7/8” Long Tube Headers
O/R X Pipe
Race Bullet Mufflers
Wheels/Tires:
17” Weld RTS w/ MT Front Runners and Hoosier Drag Slicks
Engine:
JLT Cold Air Intake
Bama X4 w/ 93 Track Tune
Stock Intake Manifold
Suspension:
Custom Fabricated Suspension Parts (We'll elaborate on this soon!)
Stock Half Shafts
Stock Bushings
Weight Reduction (We'll elaborate on this soon!)
#10
Hey Sorry about the delay! Here was the original pass:
Here's the latest pass with DriveShaftShop Half Shafts and their Carbon Driveshaft as well. Let me know if you have any other questions!
Moose-That's correct! If we didn't break something then we we're trying hard enough!
Here's the latest pass with DriveShaftShop Half Shafts and their Carbon Driveshaft as well. Let me know if you have any other questions!