first start up of built ls1!!!!
#1
first start up of built ls1!!!!
Finally got my buddies car back together. i'm curioius as to what you guys think the hp/et/traps will be. its a stock cube all forged ls1 11:1cr , magic stick 4, stage 2.5 5.3 heads, ls6 intake, full exhaust, built 4l60, yank 3800 converter, 3.73's with a mild rear, and dr's. i'm guessing he should be in the 430-450whp area? just no idea what the setup's capable of track wise. here's a little start up vid from last night, was up until 4:30 am working on it. she wont idle under like 2grand and is pig rich.
http://www.youtube.com/watch?v=HoZecBfe8ho&feature=plcp
http://www.youtube.com/watch?v=HoZecBfe8ho&feature=plcp
#3
Here's a better video of it. He got a base tune to break the motor in with. He said he's just aiming for 11's and putting down over 400 to the wheels.
http://www.youtube.com/watch?v=jNroIG92sEU
http://www.youtube.com/watch?v=jNroIG92sEU
#7
10k?? What all did he do?
5.3 heads are dirt cheap, like $200 cheap. Porting them can be expensive, but...cam, springs, pushrods, another 6-700 hundred.
I'm shopping around, almost had my hands on a set of ported 243s last night, but the guy literally sold them 2 minutes before I told him I wanted them. Those 5.3 heads are badass when ported, and they bump the compression up as well.
5.3 heads are dirt cheap, like $200 cheap. Porting them can be expensive, but...cam, springs, pushrods, another 6-700 hundred.
I'm shopping around, almost had my hands on a set of ported 243s last night, but the guy literally sold them 2 minutes before I told him I wanted them. Those 5.3 heads are badass when ported, and they bump the compression up as well.
#8
he's got about 2500 into his shortblock, 2200 into his trans/converter, 2k into the heads/cam/valvetrain, 1000 into his suspension and 500 into rebuilding the rear(waste of money since it'll blow soon lol), then a bunch of miscellanious, tuning, etc. he told me he'd have around 10k into it by the time it's done and on the road.