1fast 99gt

thanks it did a 1.67 was my best

dwtjr3

Thats a real good 60'

Whats your suspension setup? If you dont mind me asking?

ctgreddy

nice, that was my best also, nowhere near picking the tire up tho from me. heavy *** cobra front

1fast 99gt

Team z kmember coil overs strange struts rear has bmr control arms stock shocks

TCStangerv6

do you like your team z kmemeber and coil overs on your strange struts? I'm looking into getting that for my car. I already have the struts.

ctgreddy

Have you ever heard of anyone that hasn't liked their teamz stuff? I just wish there rear stuff wasn't so pricey or I would have went with their stuff.

Jay-rod427

For the power it's supposedly making that's a terrible 60'. Suspension setup must be stock to only make 1.67, if so yet another person who makes all kinds of power but can't do anything with it.... I was in the 1.55-1.58 range in my car when it had a 100 shot on the bone stock motor.

1fast 99gt

Yea very nice stuff coil over kit is loud as hell though idk if it the struts or what but I don't like that part if it. And as fare as a bad 60ft my car hooked then spun I didn't adjust anything my whole susp needs to be adjusted and nitrous hits way harder then a blower u must not have known that

01GT4.6

First thing you need to do is adjust your pinion angle. As far as nitrous hitting harder than a blower, yes but I went a 1.60 NA on 17" nittos. My pinion angle wasn't set at -2.5*. What kind of UCA & LCA bushings do you have? Do you have a front swaybar? What tire pressure and how many passes on them? How was the track prep. Lastly and very important, video tape your runs do you can see how the car is actually reacting!

1fast 99gt

I have polyurethane bushings in the control arms front sway bar us removed rear tires are m/t et streets maybe 15 passes on them ran them at 11 psi the angle is not set at all which I know is hurting me what do u think it should be set at?