89 gt for bike
11-30-2006, 03:50 PM
#1
Thread Starter
Join Date: Jul 2006
Posts: 45
89 gt for bike
Looking to trade my 89 in excellent condition for a suzuki 2003-2005 kawasaki 636 or 2003 and up honda cbr 600RR or gsxr 600
Ill also take $5,500
I am in CT but would travel for the bike if needed.
Car was garaged kept and has maybe seen 3 winters over the years.
MOTOR DESCRIPTION:
345 HORSEPOWER 302 HO 5.0 (Motor Work alone with install $7,000).
Professionally built motor which was Balanced, Blueprinted, and Hand Assembled by ASE MASTER GOLD Certified Technicians at www.enginefactory.com in Irvington NJ.
Motor is 5 years old and has less than 10000 miles on it !
Precision Machined 302 Roller Cam Block
Precision Ground Micro-Polished Crankshaft
Forged TRW PISTONS
Forged Eagle Connecting Rods
Roller H.O Camshaft E303
Edelbrock Performer 289 Aluminum Intake
Edelbrock Performer Carb. 600 CFM Model 1405 4 barrel
Windsor Heads 64cc 200cc intake runners
2.02 Stainless Steel intake Valves
1.60 Stainless Steel Exhaust valves
Heavy Duty 1.250 Diameter valve springs, 7 degree locks
Aluminum Roller Rockers
Heavy Duty Pushrods
Chrome Valve covers
Bolted and Welded in Competition Engineering Sub-frame connectors
Flex-a-lite Fan
MSD Iginition
MSD Coil
MSD Distributor
150 AMP Heavy Duty Alternator for High wattage sound systems
Heater Core Replaced 2004
Ford Blue Silicone Hose Set
Stock 9.5 to 1 Compression Ratio setup for supercharging or nitrous no problem.
LIST OF PARTS REPLACED:
Flowmasters 3 Chamber Exhaust System
Motor and Transmission mounts replaced
Heavy Duty Water pump
Pulleys
Flywheel
Centerforce Clutch
All interior power window and doorlock switches
Door lock solenoids`
New Fog lights
Saleen / LX Style Rear Light Lens Covers
Aluminum Radiator
Original 5 speed Transmission has 163,000 miles and operates fine because cars has never been abused.
And Much MUCH MORE! TOO MUCH TOO LIST!!!
Ill also take $5,500
I am in CT but would travel for the bike if needed.
Car was garaged kept and has maybe seen 3 winters over the years.
MOTOR DESCRIPTION:
345 HORSEPOWER 302 HO 5.0 (Motor Work alone with install $7,000).
Professionally built motor which was Balanced, Blueprinted, and Hand Assembled by ASE MASTER GOLD Certified Technicians at www.enginefactory.com in Irvington NJ.
Motor is 5 years old and has less than 10000 miles on it !
Precision Machined 302 Roller Cam Block
Precision Ground Micro-Polished Crankshaft
Forged TRW PISTONS
Forged Eagle Connecting Rods
Roller H.O Camshaft E303
Edelbrock Performer 289 Aluminum Intake
Edelbrock Performer Carb. 600 CFM Model 1405 4 barrel
Windsor Heads 64cc 200cc intake runners
2.02 Stainless Steel intake Valves
1.60 Stainless Steel Exhaust valves
Heavy Duty 1.250 Diameter valve springs, 7 degree locks
Aluminum Roller Rockers
Heavy Duty Pushrods
Chrome Valve covers
Bolted and Welded in Competition Engineering Sub-frame connectors
Flex-a-lite Fan
MSD Iginition
MSD Coil
MSD Distributor
150 AMP Heavy Duty Alternator for High wattage sound systems
Heater Core Replaced 2004
Ford Blue Silicone Hose Set
Stock 9.5 to 1 Compression Ratio setup for supercharging or nitrous no problem.
LIST OF PARTS REPLACED:
Flowmasters 3 Chamber Exhaust System
Motor and Transmission mounts replaced
Heavy Duty Water pump
Pulleys
Flywheel
Centerforce Clutch
All interior power window and doorlock switches
Door lock solenoids`
New Fog lights
Saleen / LX Style Rear Light Lens Covers
Aluminum Radiator
Original 5 speed Transmission has 163,000 miles and operates fine because cars has never been abused.
And Much MUCH MORE! TOO MUCH TOO LIST!!!
