A whole bunc of stuff...
#1
A whole bunc of stuff...
I'm sittin on a whole bunch of stuff that I don't need. I've tried selling these things at very reasonable prices but nobody seems to have money these days so maybe a trade will work...
What I have:
4.6L aluminum block bored .020, decked, and line honed
96 4.6L DOHC Mark VIII engine 160,000 miles fully dressed
96 Mark VIII transmission
44lb Bosch fuel injectors
95mm PMAS MAF sensor for 44lb fuel injectors
5.4L O/R Bassani X-pipe
4.6L PI Intake manifold
5.4L shortblock bored .020, decked, line honed with H-beam rods, steel 8-bolt crank, forged pistons (8.5:1), Moroso 7qt oil pan, Canton windage tray
OEM Radiator for Mark VIII
19 and 24lb injectors
What I want:
A set of stage 2 or 3 cams
A set of short tube or long tube headers (matching x-pipe with long tubes)
03-04 Cobra front bumper
If you are interested in any of these items please PM me. Let me know what you have and what you want and we can make some sort of arrangement...I can separate or mix and match certain items if you wish...
BTW, I have pics but I was not sure if pics need to be posted in this section...nevertheless I will put some up tomorrow. Thanks...!!
What I have:
4.6L aluminum block bored .020, decked, and line honed
96 4.6L DOHC Mark VIII engine 160,000 miles fully dressed
96 Mark VIII transmission
44lb Bosch fuel injectors
95mm PMAS MAF sensor for 44lb fuel injectors
5.4L O/R Bassani X-pipe
4.6L PI Intake manifold
5.4L shortblock bored .020, decked, line honed with H-beam rods, steel 8-bolt crank, forged pistons (8.5:1), Moroso 7qt oil pan, Canton windage tray
OEM Radiator for Mark VIII
19 and 24lb injectors
What I want:
A set of stage 2 or 3 cams
A set of short tube or long tube headers (matching x-pipe with long tubes)
03-04 Cobra front bumper
If you are interested in any of these items please PM me. Let me know what you have and what you want and we can make some sort of arrangement...I can separate or mix and match certain items if you wish...
BTW, I have pics but I was not sure if pics need to be posted in this section...nevertheless I will put some up tomorrow. Thanks...!!
#4
I disassembled the the 5.4 and the Mark VIII engine so now I have the DOHC intake manifold, the 4.6 aluminum block, the 4V heads with cams, the 4V rotating assembly, 5.4 steel 8-bolt crank, 5.4 rods, 5.4 cast iron block (decked, bored .020, line honed)...also have small parts like water pumps, pulleys, 4V fuel rail, 4V altenator, flex plates (6-bolt and 8-bolt), oil cooler, radiator, etc...I even have a vortech mounting bracket for a 99-03 Mustang GT...
#7
I'm sittin on a whole bunch of stuff that I don't need. I've tried selling these things at very reasonable prices but nobody seems to have money these days so maybe a trade will work...
What I have:
4.6L aluminum block bored .020, decked, and line honed
96 4.6L DOHC Mark VIII engine 160,000 miles fully dressed
96 Mark VIII transmission
44lb Bosch fuel injectors
95mm PMAS MAF sensor for 44lb fuel injectors
5.4L O/R Bassani X-pipe
4.6L PI Intake manifold
5.4L shortblock bored .020, decked, line honed with H-beam rods, steel 8-bolt crank, forged pistons (8.5:1), Moroso 7qt oil pan, Canton windage tray
OEM Radiator for Mark VIII
19 and 24lb injectors
What I want:
A set of stage 2 or 3 cams
A set of short tube or long tube headers (matching x-pipe with long tubes)
03-04 Cobra front bumper
If you are interested in any of these items please PM me. Let me know what you have and what you want and we can make some sort of arrangement...I can separate or mix and match certain items if you wish...
BTW, I have pics but I was not sure if pics need to be posted in this section...nevertheless I will put some up tomorrow. Thanks...!!
What I have:
4.6L aluminum block bored .020, decked, and line honed
96 4.6L DOHC Mark VIII engine 160,000 miles fully dressed
96 Mark VIII transmission
44lb Bosch fuel injectors
95mm PMAS MAF sensor for 44lb fuel injectors
5.4L O/R Bassani X-pipe
4.6L PI Intake manifold
5.4L shortblock bored .020, decked, line honed with H-beam rods, steel 8-bolt crank, forged pistons (8.5:1), Moroso 7qt oil pan, Canton windage tray
OEM Radiator for Mark VIII
19 and 24lb injectors
What I want:
A set of stage 2 or 3 cams
A set of short tube or long tube headers (matching x-pipe with long tubes)
03-04 Cobra front bumper
If you are interested in any of these items please PM me. Let me know what you have and what you want and we can make some sort of arrangement...I can separate or mix and match certain items if you wish...
BTW, I have pics but I was not sure if pics need to be posted in this section...nevertheless I will put some up tomorrow. Thanks...!!
i have a 1992 5.0
Thread
Thread Starter
Forum
Replies
Last Post
CrazyCobraSpeed
5.0L (1979-1995) Mustang
31
02-27-2007 05:22 PM