coop7

Gonna use it to build then when I'm done I'm gonna drop it in my car...
I just bought a cam for my car...
Can't think of the specs off the top of my head...
They're floatin around in a post here somewhere...
But I wanna buy forged internals and a 4.2l stroker kit,
and p&p the heads and intake...
Would my cam still work for a 4.2 or would I have to buy a new cam?
Thanks,

-Coop

coop7

Cam specs:Intake Exhaust
Adv Duration 273 281
Dur @ .050 218 226
Valve Lift .500 .500

Lobe Seperation: 112.0

-Coop

The Yellow Pinto

hmmm. i think well have to wait for lilroush or mysteed to chime in. cause songtradingusa dont know. (suprise? :P)

ESG-642T

The cam will work...

Will it be the best for your application, that will have to be determined later.

coop7

Aight cool...
Thanks guys...
Yeah...
If anyone knows wut cam would be best for that setup lemme know...
I plan on EVENTUALLY puttin on a blower too...
But that's in the FAR FAR future...
Gonna just run stroked and cammed until i save up about 7-8k and can afford to do it right...
Thanks again,

-Coop

mysteed

That cam should be pretty good when combined with a blower. Depending on what blower you are putting on and how much boost you're planning on running it might be a bit small.

JKs95stang

Agreed, from the specs listed, not a radical cam or anything, but should perform and sound sweet with a decent setup!!

coop7

Aight...
Cool...
Thanks again guys for all yalls input and help...

-Coop