Fist time at the track with my new car/and old cars mods
05-09-2009, 02:26 AM
#1
3rd Gear Member
Thread Starter
Join Date: Jul 2007
Location: Beaufort,NC
Posts: 719
Fist time at the track with my new car/and old cars mods
Ok i took both of my cars up to the track last night.
96 stang with spilt-port 4.3
01 full bolt-ons with nos and better tune.
The 96 blew-up the rear-end or tanny on the line.I will not move at all but i cant tell just yet.I put my friends set 10" et drags on there. stock rear/stock tranny,clutch.all we know is something broke
the 01 did very well laying out low 14s with 50 shot nos.I will get sometime slips up asap.
96 stang with spilt-port 4.3
01 full bolt-ons with nos and better tune.
The 96 blew-up the rear-end or tanny on the line.I will not move at all but i cant tell just yet.I put my friends set 10" et drags on there. stock rear/stock tranny,clutch.all we know is something broke
the 01 did very well laying out low 14s with 50 shot nos.I will get sometime slips up asap.
05-10-2009, 05:20 AM
#6
Just get a GT/Mach1/Bullet rear or an 03/04 Cobra IRS if you want IRS. I dont know why you would want the shorter fox rear.
SRA will run you about $500 if you shop around
IRS will run upwards of $1200 from ebay from an 03/04 Cobra
You want the 03/04 because it is stronger and has 3.55 gears.
Good think it was the clutch, you might want to think about updating the whole drivetrain flywheel back.
-Eric-
SRA will run you about $500 if you shop around
IRS will run upwards of $1200 from ebay from an 03/04 Cobra
You want the 03/04 because it is stronger and has 3.55 gears.
Good think it was the clutch, you might want to think about updating the whole drivetrain flywheel back.
-Eric-
05-10-2009, 01:41 PM
#8
Dang, that sucks to hear about the clutch, thankfully it was something simple. I agree with the Spec, they make a great quality clutch, I know there is an issue with the bearing that comes with the Spec, but I'll be damned if I remember what it is, maybe another member will chime in and boost my memory.
05-10-2009, 06:04 PM
#9
3rd Gear Member
Thread Starter
Join Date: Jul 2007
Location: Beaufort,NC
Posts: 719
lol yea they got rollers in them!! there not soild brass or what not.
well 99-04 rear-end is longer so no go...
94-98 rear-ends ppl want your first born for them around here
88-93 foxs rear ppl are pretty much giving away because there going to 9"
well 99-04 rear-end is longer so no go...
94-98 rear-ends ppl want your first born for them around here
88-93 foxs rear ppl are pretty much giving away because there going to 9"
Thread
Thread Starter
Forum
Replies
Last Post
inyadreems
Archive - Mustangs For Sale
2
08-21-2015 09:10 AM
92 5.0stang
5.0L (1979-1995) Mustang
4
08-13-2015 06:46 AM
Milan Dragway
Members Rides and Car Show Section
0
08-12-2015 03:43 PM