Going boosted!!! Needing help

Reply Subscribe

Thread Tools

Search this Thread

10-12-2009, 12:04 AM

ramoyer1

3rd Gear Member

Thread Starter

Join Date: Jul 2007

Location: Beaufort,NC

Posts: 719

Going boosted!!! Needing help

Ok my friend gave me a turbo from what i found out it is a Garrett turbo.

here are the stats i want to run this on my stang i am needing to know if it will be enuff or to much for my v6er.

Genuine GARRETT TA3410 Plain Bearing External Wastegated

360 Degree Thrust Bearing
Oil lubricated centersection.
Manufacturer-GARRETT
Model- TA3410
Serial Number -715583 5006
T3 Flange
4'' Inlet
Compressor (A/R) .70
Turbine (A/R) .63
4 Bolt Exhaust flange
External Wastegated
Good for 500- hp

10-13-2009, 08:23 PM

LilRoush

6th Gear Member

Join Date: Feb 2007

Location: South FL

Posts: 8,540

Sad to say it, but your buddy gave you the cheap part. You're about $4000 in parts away from having that on your car.
Is the turbo in good shape?

10-15-2009, 12:54 PM

ramoyer1

3rd Gear Member

Thread Starter

Join Date: Jul 2007

Location: Beaufort,NC

Posts: 719

brand new it has never been used. i mean it is a pretty big turbo.I got turbo headers alrdy made for my car.

10-15-2009, 05:14 PM

LilRoush

6th Gear Member

Join Date: Feb 2007

Location: South FL

Posts: 8,540

Shoot, if you have the headers made, you're half way there. Just mount up the turbo and see what you need to run for exhaust piping. Keep it simple and run a single 3" pipe out the back.

10-15-2009, 06:45 PM

ramoyer1

3rd Gear Member

Thread Starter

Join Date: Jul 2007

Location: Beaufort,NC

Posts: 719

then what else do i need and will the turbo be fine by itself?

I got front mount innercooler,turbo,headers,tuner.

Need fuel pump,boost gauge,wastegate,bov.what else?

Last edited by ramoyer1; 10-15-2009 at 11:52 PM.