T5 to TR3650 Swap Whats Needed?

Reply Subscribe

Thread Tools

Search this Thread

10-27-2009, 06:35 PM

winner99

3rd Gear Member

Thread Starter

Join Date: May 2006

Location: New Jersey

Posts: 829

T5 to TR3650 Swap Whats Needed?

I want to swap my shot t5 for a 3650 but is it a direct swap or is there an adapter needed? It comes with the bellhousing attached as one piece so Im assuming you need one? Where can I get one and how much is it if one is needed?

10-27-2009, 07:29 PM

moontang

4th Gear Member

Join Date: Jul 2007

Location: rockwell/charlotte NC

Posts: 1,451

as far as i know those will only go on the mod motors since the bell housing is built in

10-28-2009, 02:48 AM

RyansQuick6

Reverse Gear Member

Join Date: Dec 2006

Location: Baton Rouge, LA

Posts: 8,130

No point in it.

10-28-2009, 04:25 AM

NeoTokyo

6th Gear Member

Join Date: Dec 2003

Location: Sacramento, CA

Posts: 6,524

The 94/95 GT conversion will work with our 94-04 V6's.

http://www.ddperformance.com/shop/in...p?cPath=108_98

10-29-2009, 01:14 AM

neo8222

4th Gear Member

Join Date: Nov 2007

Location: Florida

Posts: 1,701

do the 5.0 and the 3.8 share the same bell housing bolt pattern?

10-29-2009, 04:46 AM

NeoTokyo

6th Gear Member

Join Date: Dec 2003

Location: Sacramento, CA

Posts: 6,524

Yes, but only the 94/95 GT share the same input shaft length, I think the same goes for the Cobra of those years - 99.5% sure :F

If I remember correctly the 94/95 GT and 94-04 V6 are 5/16" longer than the fox 5.0.