V6 (1994-2004) Mustangs Technical discussions on the 3.8L and 3.9L V6 torque monsters

Need a rack and pinion.

Thread Tools
 
Search this Thread
 
Old 09-20-2011, 12:06 AM
  #11  
petrock
4th Gear Member
 
petrock's Avatar
 
Join Date: Nov 2006
Location: CA
Posts: 1,670
Default

Originally Posted by Chucks95RT
At low speed(5mph) or stopped, my steering makes a noise like I have no fluid when turning right...left...not so much. I check fluid and it's at the mark; no leaks underneath either
Your power steering pump is on its way out. The rack is fine.
petrock is offline  
Old 09-20-2011, 07:09 PM
  #12  
neo8222
4th Gear Member
Thread Starter
 
neo8222's Avatar
 
Join Date: Nov 2007
Location: Florida
Posts: 1,701
Default

I know it need a new one cause i removed it from the car and inspected tie rod ends (inner and outer). The inners were also replaced last year. There is also play on the pinion input of the rack. Outer ends also look good. Rubber seals are even still intact. Did a whole front suspension inspection before i found the play on the pinion to the steering rack. Also dont worry i didnt upset the alignment when i took it off. I disconnected it as a whole unit. Ive rebuilt transmissions, motors, and even rear ends (my god i hate them lol) trust me, i know what im doing lol
neo8222 is offline  
Old 09-21-2011, 04:06 PM
  #13  
03shadow
5th Gear Member
 
03shadow's Avatar
 
Join Date: May 2009
Location: Pennsylvania
Posts: 2,350
Default

how bad is the noise neo? i have a pretty bad noise that i cant seem to find on youtube
03shadow is offline  
Old 09-21-2011, 05:08 PM
  #14  
neo8222
4th Gear Member
Thread Starter
 
neo8222's Avatar
 
Join Date: Nov 2007
Location: Florida
Posts: 1,701
Default

i have no noise actually just play
neo8222 is offline  
Old 09-22-2011, 05:23 PM
  #15  
03shadow
5th Gear Member
 
03shadow's Avatar
 
Join Date: May 2009
Location: Pennsylvania
Posts: 2,350
Default

oh i thought you had a noise
03shadow is offline  
Old 01-17-2012, 07:59 AM
  #16  
rastarocket
1st Gear Member
 
rastarocket's Avatar
 
Join Date: Jan 2012
Location: North Carolina
Posts: 62
Default

Originally Posted by neo8222
Well I need a new rack and pinion for my mustang. I'm looking to try and find a good cheap one. manual or power i don't care just something that will work and not have play in it. my tie rod ends are good they were replaced recently but the rest needs help now. I would consider a used one as well if it were off a fairly low miles car.

Basically I'm asking for help to find a good priced unit. If anyone knows a website or has one they would part with let me know, i would greatly appreciate it.
hey man, im having the same problem with my 04 gt... i know its the RandP cuz when i jack it up i can clearly hear the creaks coming from inside of it. it deff isnt any other front end parts. i was thinking of ordering one off ebay and just replacing it, have you done it yet??? how hard is it? do u have any tips for me when i replace mine? thanks alot a appreicate it a ton!
rastarocket is offline  
Old 01-17-2012, 08:03 AM
  #17  
rastarocket
1st Gear Member
 
rastarocket's Avatar
 
Join Date: Jan 2012
Location: North Carolina
Posts: 62
Default

and i was also thinking i could get a manual rack instead of the one on there now, i like simple.. is that a good idea or will that not work with the current system?
rastarocket is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
allenmaty
2005-2014 Mustangs
2
09-24-2015 09:17 AM
Cavedawg
Classic Mustangs (Tech)
6
09-17-2015 09:51 AM
Blk Vert
5.0L General Discussion
2
09-09-2015 12:16 PM
Urambo Tauro
5.0L (1979-1995) Mustang
22
09-07-2015 12:47 PM



Quick Reply: Need a rack and pinion.



All times are GMT -5. The time now is 05:26 AM.