1995 Mustang v6 OBDI or OBDII?
#1
1995 Mustang v6 OBDI or OBDII?
There is nothing wrong with my car but I'm a little confused in which obd generation I have, I have the 16 pin obd ii connecter under my steering wheel but I know if it was obdii my check engine light would come in when my ignition switch is in the "on" position, mine how ever does not, and I keep hearing that only 94-95 v6 stangs obdii but the Gt's aren't , my sticker in the door says manufactured may 1994 i dont know if that helps and also if it was obdii wouldn't there be an emissions sticker in my engine compartment saying its obdii equiped? I'll post a picture of the connecter, thanks for the help.
#5
I think your year was the year they just started using OBD 2 in your car but some were also OBD 1. The best way to find out is to hook up a scanner to the OBD 2 port and see if it powers up the scanner. If it's OBD 1 it won't have any power going to it. As for your engine light even if it's OBD 1 your engine light should eluminate for a few seconds when the key is turned on.
#6
I found out that it is OBDII by hooking up a scanner to it, the only code,problem was the camshaft position sensor.. also i still have no check engine light, is there any way to fix that, and has any1 r&r a camshaft sensor on a 3.8?
#7
Your bulb is probably not working, I would check the bulb.
Thread
Thread Starter
Forum
Replies
Last Post
jthorn9
V6 (1994-2004) Mustangs
0
05-03-2011 12:34 PM