When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i just did a clutch job on my 99 v6 and had the front of the engine lifted up for ir to access the bell housing bolts. after reassembly and an oil change it moves so the clutch is good but oil isnt registering on my dipstick. 4.5 quarts of synthetic were put in by me. before anyone asks; yes the filter was changed and no there are not two orings on it. im afraid to add too much oil to it. and when the tranny is in neutral the rpms drop to like 450, but i think thats just the brand new clutch grabbing a little. please help me find my oil!!
proper amount yeah, no leaks that ive found. did the oil in a shop last night, no leaks, checked this morning...no leaks but ill check again later today