Compatibility Question
#31
94/95 V6s did not come with the strut tower brace, that was taken off of a 94/95 5.0. That's the way its made, it will fit 94-04 Mustangs, however there may be clearance issues that will require custom bending to make it fit or you have to get an aftermarket one. For example, the sway bar won't even fit 94/95 5.0s that have aftermarket upper/lower intakes, or intake spacers.
Last edited by 1slow67; 01-23-2013 at 11:01 PM.
#34
Personally, in regards to the PaceSetter comments, I like the sound difference they make, however they ARE EXTREMELY difficult to install.. I've done them twice, on 2 friends cars, the problem is that you would need to remove the upper intake, and valve covers to increase clearance however they still drive into the firewall on the way down and come over the heads quite a bit, in other words, they get stuck. We spent hours trying to get them on in both scenarios. Eventually we got them by reshaping some things, and I like the sound difference, but idk, the amount of work you have to put into them is immense. Although I must add, one of my friends says he notices better top end performance.
#37
Hey guys, its been a while! Well the local junkyard is having a 50% off sale and I wanted to pick up a t lock for my car, or just switching out the rear end entirely. The 8.8 rear end has a lsd in it already right?
Thanks!
Thanks!
#39
I've seen that before on some 99-04 Mustangs they'll fit, some they won't. Basically some car the metal flange at the back of the engine bay is the right size and on some its either shorter or non existent, just depends.
Thread
Thread Starter
Forum
Replies
Last Post
AMAlexLazarus
AmericanMuscle.com
3
10-02-2015 08:06 AM
AMAlexLazarus
AmericanMuscle.com
0
10-01-2015 09:21 AM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM