Go Back   MustangForums.com > Ford Mustang Tech > V6 (1994-2004) Mustangs
Sign in using an external account
Register Forgot Password?
Search


V6 (1994-2004) Mustangs Technical discussions on the 3.8L and 3.9L V6 torque monsters
Sponsored by Optima Batteries


Welcome to Mustang Forums!
Welcome to Mustang Forums.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!


Reply
 
 
 
 
Thread Tools Search this Thread
Old 05-08-2013, 04:35 PM   #1
darcane
 
Join Date: Apr 2013
Vehicle: 2001 Mustang Premium V6 Convertible
Location: Washington
Posts: 29
Default New Edge Convertible Top Replacement - Doing It Myself

So, a month ago I bought an '01 'vert for my wife. It's only a V6, it's got some blemishes, and the top was shot. But hey, it was cheap.

Click the image to open in full size.


Some of the damage on the ragtop:
Click the image to open in full size.

I've never done a convertible top before, but I found these instructions:
http://www.ehow.com/how_4446394_chan...d-mustang.html
and figured, "how hard can it be."
This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Mustang Forums!
darcane is offline   Reply With Quote
Old 05-08-2013, 05:26 PM   #2
darcane
 
Join Date: Apr 2013
Vehicle: 2001 Mustang Premium V6 Convertible
Location: Washington
Posts: 29
Default

I've got the rag top completely removed now. For reference, those instructions are decent, but leave out details in some spots that would be useful. Most notably, so far, in removing the headliner. The order you remove it is important, and Step 18 really should be before Step 17.

The paint is coming off my header bow in sheets. Is this a common problem?
Click the image to open in full size.

I haven't figured out how I plan on dealing with this yet.

Also, it seems like a dumb question, but where do you get tacking strip from? The vendors on this site seem to only carry it as part of a kit with the tops, and I already bought the top (as separate pieces).
darcane is offline   Reply With Quote
Old 05-09-2013, 07:49 AM   #3
BabyGT
5th Gear Member
 
BabyGT's Avatar
 
Join Date: Mar 2012
Vehicle: 2004 3.9 Vert & 1994 5.0 Vert
Location: Virginia
Posts: 2,094
X757XVeritas
Default

I re used my old strips, also you should not have removed any part of the frame from the car to replace the fabric of the top. It's a pain in the @55 to replace the top. If I had another rip I'd be more than willing to pay someone the 1200 I was quoted to have it done. Biggest headache of my life.

I'd spray some rust inhibitor on that piece before I put it back on.
__________________


04 3.9l Convertible- Daily driver
94 5.0l Convertible- Work in progress
92 5.0l Hatchback- Another work in progress
BabyGT is offline   Reply With Quote
Old 05-09-2013, 10:51 AM   #4
darcane
 
Join Date: Apr 2013
Vehicle: 2001 Mustang Premium V6 Convertible
Location: Washington
Posts: 29
Default

Quote:
Originally Posted by BabyGT View Post
I re used my old strips, also you should not have removed any part of the frame from the car to replace the fabric of the top. It's a pain in the @55 to replace the top. If I had another rip I'd be more than willing to pay someone the 1200 I was quoted to have it done. Biggest headache of my life.

I'd spray some rust inhibitor on that piece before I put it back on.
The header bow was only removed to deal with the paint/corrosion issues.

The tacking strip was very brittle and simply removing the staples caused it to break in several places. Reusing it wasn't really an option.

I'm going to check on price to powder coat it today. If it's reasonable on price, I'll go that route otherwise I'll just clean it up as best as I can and rattle can it.
__________________
-Mike
2001 Convertible - V6/Auto
1967 Coupe - 302/4spd
darcane is offline   Reply With Quote
Old 05-09-2013, 12:26 PM   #5
BabyGT
5th Gear Member
 
BabyGT's Avatar
 
Join Date: Mar 2012
Vehicle: 2004 3.9 Vert & 1994 5.0 Vert
Location: Virginia
Posts: 2,094
X757XVeritas
Default

If you rattle can it make sure you get some kind of rust inhibitor like por 15. It will prevent it from oxidizing again. And my tack strips cracked in a few places but it still held up fine to the new top. I couldn't find new strips anywhere. The dealer doesn't even sell them anymore.
__________________


04 3.9l Convertible- Daily driver
94 5.0l Convertible- Work in progress
92 5.0l Hatchback- Another work in progress
BabyGT is offline   Reply With Quote
Old 05-23-2013, 04:01 PM   #6
darcane
 
Join Date: Apr 2013
Vehicle: 2001 Mustang Premium V6 Convertible
Location: Washington
Posts: 29
Default

Well, I got it powdercoated:
Click the image to open in full size.

One problem is that plastic bits will melt when the part is baked. We weren't able to salvage the four white plastic pucks that attach to the mounting arms (you can see them in the ealier picture). I'll need to track down replacements.

The tacking strip I got from here:
http://www.wsusol.com/

I also found this series of videos that has some useful info:
__________________
-Mike
2001 Convertible - V6/Auto
1967 Coupe - 302/4spd
darcane is offline   Reply With Quote
Old 06-06-2013, 01:40 PM   #7
darcane
 
Join Date: Apr 2013
Vehicle: 2001 Mustang Premium V6 Convertible
Location: Washington
Posts: 29
Default

Well, it's "Done":
Click the image to open in full size.Click the image to open in full size.

There are still some trim pieces, but I just closed it and drove it for the first time. A few things that made it easier to install that I haven't seen elsewhere:
1. Don't tighten the bolts on the left and right tacking bars that hold the rear of the top until you have closed it the first time. It was a struggle to get it closed at first before it stretches out.
2. Right behind the windows is a tension spring that connects to a reinforced hole in the top. Attach these before bolting down the three rear tacking bars. These guys are a real bear to hook up.
__________________
-Mike
2001 Convertible - V6/Auto
1967 Coupe - 302/4spd
darcane is offline   Reply With Quote
Old 06-06-2013, 01:40 PM
MustangForums
Ford Mustang




Paid Advertisement

 
 
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Advertising

Featured Sponsors
Vendor Directory
New Sponsors
All times are GMT -5. The time now is 09:34 AM.

© Internet Brands, Inc.


This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
Emails Backup