V6 (1994-2004) Mustangs Technical discussions on the 3.8L and 3.9L V6 torque monsters

Plastic interior bad rattle

Old 04-19-2014, 11:42 AM
  #1  
Jeremyzincv6
Thread Starter
 
Jeremyzincv6's Avatar
 
Join Date: Feb 2014
Location: Colorado
Posts: 9
Default Plastic interior bad rattle

My 2002 v6 just hit 112k. and the plastic on the inside I'm sure is starting to wear out, but is there a way I can fix it without replacing all of the plastic in there? The things that rattle the most are the Dash bezel for the AC and Heating along with where my stereo is, it's aftermarket. The plastic boot cover that goes around the shifter, and the door panels, especially the plastic door handles on the inside where the door controls and power windows are. Is there a way to quiet all of this down? It usually rattles on bumps or on a somewhat rough road. It gets very annoying. My window on my driver side rattles when i regularly drive as well. All help appreciated thanks.
Jeremyzincv6 is offline  
Old 04-20-2014, 01:59 PM
  #2  
jthorn9
The Godfather
 
jthorn9's Avatar
 
Join Date: Sep 2005
Location: Temple, Texas
Posts: 15,481
Default

All the rattles are caused by either the plastic pins being broken or backed out or the security screws doing the same. Most of the interior is held in place by those plastic pressure pins that have the little spines that hold it all in. If those break or back out then it'll cause noise. What's not secured by those plastic pins are held in place by interior screws.
jthorn9 is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AmericanMuscle4.6GT
2005-2014 Mustangs
7
11-10-2015 02:06 PM
2015Ecoboost
New Member Area
3
09-17-2015 01:48 PM
movielover40
V6 S197 General Discussion
0
09-15-2015 10:37 AM
robjh22
Suspension
0
09-08-2015 12:47 PM
tmdm
2005-2014 Mustangs
1
09-04-2015 06:45 PM


Thread Tools
Search this Thread
Quick Reply: Plastic interior bad rattle



All times are GMT -5. The time now is 01:46 PM.