rred

I recently have picked up a 1984 v6 3.8lx automatic convertible. Ive been looking to do a transmission swap on it with a manual transmission. i was looking at the tremec TKO's and the T5's. If anyone could provide me with a full parts list for the sawp i would appreciate it so much.

99GTvert

Interesting..a sixxer fox. I'm gonna move this to the appropriate tech section..

I moved this to the 94-04 sixxer section..anyone have any insight for this sixxer fox?

rred

Thank you 99Gtvert! I've been looking all over for response to this question but haven't seen any

PNYXPRESS

To avoid a wiring mess, i would try a T5 out of a fox 5.0, bell, pedal assymbly, fork, cable, clutch kit from any 94-04 v6 and flywheel for the 84 v6

rred

Thnak you so much!!!!! I appreciate that so much

PNYXPRESS

Biggest thing is going to be making sure input shaft is correct length to work with bell housing, and that thr bell will bolt to your engine without a clearance issue.

rred

Okay. Do you have any expierence with the swap or have ever seen anyone do it