V6 (1994-2004) Mustangs Technical discussions on the 3.8L and 3.9L V6 torque monsters

UnderDrive Pulley Thread----> Again

Thread Tools
 
Search this Thread
 
Old 01-09-2007, 06:24 AM
  #1  
ecuadorspimp
2nd Gear Member
Thread Starter
 
ecuadorspimp's Avatar
 
Join Date: Mar 2006
Location: Ozone Park
Posts: 356
Default UnderDrive Pulley Thread----> Again

I know, I know, everyone always wonders about Underdrive pullies so I was wondering if this is the way to go and if this includes everything I will need for My setup. Thanks, I appreciate it.

http://www.rpmoutlet.com/musv6asp.htm
ecuadorspimp is offline  
Old 01-09-2007, 06:55 AM
  #2  
Rook6
3rd Gear Member
 
Rook6's Avatar
 
Join Date: Mar 2006
Location: Fort Bragg, NC
Posts: 629
Default RE: UnderDrive Pulley Thread----> Again

Yes, that's what I've got. Make sure you get the neutral balancer when it gets to your door, since you have an 01.
Rook6 is offline  
Old 01-09-2007, 06:58 AM
  #3  
ecuadorspimp
2nd Gear Member
Thread Starter
 
ecuadorspimp's Avatar
 
Join Date: Mar 2006
Location: Ozone Park
Posts: 356
Default RE: UnderDrive Pulley Thread----> Again

neutral balancer? what is that? where do i get that?
ecuadorspimp is offline  
Old 01-09-2007, 07:07 AM
  #4  
Rook6
3rd Gear Member
 
Rook6's Avatar
 
Join Date: Mar 2006
Location: Fort Bragg, NC
Posts: 629
Default RE: UnderDrive Pulley Thread----> Again

It'll come with the package. It's the harmonic balancer that goes between the block and the pulley. There's a pic of it on that link you have up there.
Rook6 is offline  
Old 01-09-2007, 07:13 AM
  #5  
ecuadorspimp
2nd Gear Member
Thread Starter
 
ecuadorspimp's Avatar
 
Join Date: Mar 2006
Location: Ozone Park
Posts: 356
Default RE: UnderDrive Pulley Thread----> Again

oh alright. as long as it comes included im good.
ecuadorspimp is offline  
Old 01-09-2007, 07:18 AM
  #6  
Rook6
3rd Gear Member
 
Rook6's Avatar
 
Join Date: Mar 2006
Location: Fort Bragg, NC
Posts: 629
Default RE: UnderDrive Pulley Thread----> Again

Be prepared to rent a pulley/harmonic balancerpuller. Some auto parts stores will have a set of doner stuff you can borrow out.
Rook6 is offline  
Old 01-09-2007, 10:12 AM
  #7  
flash20
5th Gear Member
 
flash20's Avatar
 
Join Date: Jun 2006
Location: Texas
Posts: 4,694
Default RE: UnderDrive Pulley Thread----> Again

ORIGINAL: Rook6

Be prepared to rent a pulley/harmonic balancerpuller. Some auto parts stores will have a set of doner stuff you can borrow out.
could u feel the pulleys once u installed them?
flash20 is offline  
Old 01-09-2007, 10:38 AM
  #8  
Rook6
3rd Gear Member
 
Rook6's Avatar
 
Join Date: Mar 2006
Location: Fort Bragg, NC
Posts: 629
Default RE: UnderDrive Pulley Thread----> Again

It's not a "oh dear lord that's amazing!" feeling, but there's a difference. Maybe it's just my numb assal-region but hp/tq increases I find hard to feel. Dynoed like...7/5 peakhp/tq increase.
Rook6 is offline  
Old 01-09-2007, 02:44 PM
  #9  
232_01mustang
2nd Gear Member
 
232_01mustang's Avatar
 
Join Date: Oct 2006
Location:
Posts: 412
Default RE: UnderDrive Pulley Thread----> Again

UDP is a great bolt-on...but i would rather save that money and buy a dry nitrous system for $225 than put down $200 on a pulley that will give you about 9rwhp when the nitrous can range from 25 to 100rwhp if you use it safely with a tune...idk thats just my .02 though
232_01mustang is offline  
Old 01-09-2007, 04:07 PM
  #10  
Rook6
3rd Gear Member
 
Rook6's Avatar
 
Join Date: Mar 2006
Location: Fort Bragg, NC
Posts: 629
Default RE: UnderDrive Pulley Thread----> Again

ORIGINAL: 232_01mustang

UDP is a great bolt-on...but i would rather save that money and buy a dry nitrous system for $225 than put down $200 on a pulley that will give you about 9rwhp when the nitrous can range from 25 to 100rwhp if you use it safely with a tune...idk thats just my .02 though
Man I gaurantee I'd blow my engine the first week if I got nitrous. I'd use it all the damn time. Driving to work, in the McDonald's drive-through, school zones, everythere!
Rook6 is offline  


Quick Reply: UnderDrive Pulley Thread----> Again



All times are GMT -5. The time now is 08:02 PM.