4.0L 1/4mi ET's & Dyno Numbers
06-04-2011, 07:43 PM
#275
1st Gear Member
Join Date: Aug 2007
Location: Florida
Posts: 79
When I took our 2006 V6 Auto to the strip over a year ago, it did a 15.2 @ 90 (timeslip below). With the exception of GT take off dual exhaust with a MAC Pro Chamber, the car is all stock. I recently took my wife's new 2011 V6 Auto to the strip and it did 13.8 @ 102.
Last edited by SoFL05GT; 06-04-2011 at 07:51 PM.
06-26-2011, 10:21 AM
#276
2nd Gear Member
Join Date: Aug 2009
Location: Michigan
Posts: 312
Here`s my latest. Just 3.55`s replacing the 2.73`s and AM Bama`s new 93 performance tune.
DA put my best at 13.74 @ 102.06. DA or not I`m happy with this little V6 hauling this 3840 lbs car (with my 150 lb body and the 45 lb belly) inside.
DA put my best at 13.74 @ 102.06. DA or not I`m happy with this little V6 hauling this 3840 lbs car (with my 150 lb body and the 45 lb belly) inside.
Last edited by snaf2u; 06-27-2011 at 12:46 PM.
06-27-2011, 12:22 PM
#277
Join Date: Sep 2008
Location: Michigan
Posts: 41
I wanted to see if the 90mm CAI and x-pipe exhaust actually did anything. These are all on a Diablosprot hard shifting tune that isn't set up right for the MAF housing I have.
The best run I had was a 14.791, photobucket is being stupid.
My stock time was 15.0+ so it could be a little bit better with a proper tune but for right now I'm happy with it.
The best run I had was a 14.791, photobucket is being stupid.
My stock time was 15.0+ so it could be a little bit better with a proper tune but for right now I'm happy with it.
Last edited by allaflhollows; 06-27-2011 at 01:44 PM.
