dwagner825

OK Guys I've searched and found dyno result threads for the GT boys. I know a lot of you have tested your 4.0rides since adding on. Let's post our results. Please post auto or manual and what add ons you have. I have added JBA shorty headers, JBA Exhaust, Roush CAI and will be throwing in the bamatune when Doug completes it. I will dyno then and post. I never did a baseline so those of you who did please post those as well.

Dan

chrisc

Dont have a scanner..but here it is:

269rwhp/264rwtq

At the time, for power, all I had:
Vortech @ 9psi non-cooled
JBA Axle Back

Also, that dyno was in 3rd gear, and I have an auto. My tune is for 91 oct. Temp was around 75degs.


My next dyno will be in the mid 300s

pat6674u

250 RWHP/ 275 RWTQ

Ca spec X-charger

tilt

2005 manual on Dynojet,
188rwhp215tq stock
202rwhp 229tq withB ama tune,c&L intake and true dual exhaust (gt mufflers)

wolfey2k

176rwhp 209tq stock
500rwhp 550tq in my dreams

28HopUp

It would also be helpful to identify whether your result were from a DynoJet or Mustang Dyno

Denny Carlton

This is may first dyno. You may not be able to see the numbers, my Max was 191rwhp/223rwtq This is my second dyno: my Max was 194wrhp/218rwtq, after I put the gearsin. I need to dyno my car again, because I've done alot on the car after that last dyno.

Jerseyfury2

Let's see the dyno results of a 6 witha 12psi intercooled Vortech!
Scrming.....

MrSandman

Portable dynojet. It was a second gear pull on my auto. I had the b@ma race tune installed. I didn't get a chance to load the brenspeed tune.

I ran 196.02 HP and 200.35 tq.

Run conditions: 95.27 F, 29.27 in-Hg, Humidity: 47%, SAE: 1.04


http://www.youtube.com/watch?v=gbmPiz9rY1k

chrisc

should be 330 for the auto. that is what I am going to be running within the next few months.