Rim & Tire ?
#1
Rim & Tire ?
I have an '07 V6 that came w/ 17" factory bullits. Found some 18" bullits, 9" wide front and 10" wide rear for a good price. It's just that they are from an '03 GT and not sure about fitment. Any help would be greatly appreciated.
#4
6th Gear Member
Also, going from 17's to 18's, it's recommended but not necessary to install different turn-stops. In some cases, depending on that offset change plus the tire dimensional changes, you may get some rubbing during full lock turns. Some folks live with it; others replace the stops.
#5
With the 03 GT 24mm offset instead of the 17" 45mm OEM S197 rims,
the steering stops would not be required because of the difference
between the 45mm of offset with the 17" rims and the 24mm offset
of the 03 GT 18" rims. The 8 and 10" rim widths makes me think that
they are aftermarket and who knows what the offset it for those...
I just know the OEM fitment offsets and their limits between platforms.
the steering stops would not be required because of the difference
between the 45mm of offset with the 17" rims and the 24mm offset
of the 03 GT 18" rims. The 8 and 10" rim widths makes me think that
they are aftermarket and who knows what the offset it for those...
I just know the OEM fitment offsets and their limits between platforms.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
KingRando
2005-2014 Mustangs
5
10-02-2015 08:06 AM
nmra1965
Other Professional Racing
0
09-26-2015 10:46 AM