Need some advice
08-06-2011, 12:33 PM
2nd Gear Member
Thread Starter
Join Date: Jul 2011
Location: California
Posts: 303
Need some advice
I have two choices right now and I cannot decide which I want.
I want to either have full striping going from bumper to bumper. Will be matte black on top of ingot silver.
I also am considering doing stripes all the way except on the roof, where I will matte black the roof fully. Again matte black on ingot silver.
Anyone have opinions or can do a shop for me?
TIA!
08-06-2011, 03:48 PM
1st Gear Member
Join Date: Feb 2011
Location: colorado
Posts: 123
what size stripes?shops can always do it but it costs money.doing it yourself is not bad as long as you buy the pre-cut kits.
08-06-2011, 05:46 PM
2nd Gear Member
Thread Starter
Join Date: Jul 2011
Location: California
Posts: 303
lol, actually I own a vinyl plotter so everything is going to be done by me. Cost for both is minimal to a point where it is non existant
08-06-2011, 06:06 PM
2nd Gear Member
Thread Starter
Join Date: Jul 2011
Location: California
Posts: 303
I did some really, really crappy photoshops.
This is my car now:
This is the vinyled roof:
This is the striped roof:
08-06-2011, 06:37 PM
1st Gear Member
Join Date: Feb 2011
Location: colorado
Posts: 123
I kind of like them both.I would go with the stripes bumper to bumper but its hard to tell what the finished product would really look like the other way.
08-06-2011, 06:42 PM
3rd Gear Member
Join Date: Jul 2009
Location: Garner NC
Posts: 765
I would say full stripes, the entire vinyl roof would be different, but I think it would look awkward, I did my full stripes and think it is the perfect fit.
08-06-2011, 06:43 PM
4th Gear Member
Join Date: Jul 2011
Location: NE
Posts: 1,207
Striped bumper to bumper.
Since I helped you on this tough decision,
can you make me up some vinyl stripes for my baby too?
I'll pay shipping. =D
08-06-2011, 11:00 PM
2nd Gear Member
Thread Starter
Join Date: Jul 2011
Location: California
Posts: 303
My stripes are more spread out than the OEM stripes so I am wondering if that will be kind of awkward. Maybe I should take off the current stripes and put them on closer together
08-07-2011, 01:43 AM
1st Gear Member
Join Date: Feb 2011
Location: colorado
Posts: 123
I have the 12inch with a 2 inch gap.I like em. for some reason I am having trouble posting pics
08-07-2011, 09:30 AM
6th Gear Member
Join Date: Jul 2008
Location: Acworth, GA
Posts: 12,260
Are your stripes as far apart as they look in the photoshopped pictures? If so I am not sure but I think I would go with stripes all the way even on the roof.