Genuine italian leather shift and brake boots for your Mustang (05+)
#91
Hi,
let me try to answer each of your questions in an orderly manner.
If you order the boot 4" shorter than stock you will get this:
Assuming that's what you wanted?
If you order the regular boot, that is the standard. The 4-panel boot is one that has 4 seams forming an "X" going to the corners of the center console. Please DO NOT order that, if you want the front to back layout.
Please just mention in the comments field on the order form, we'd be happy to acommodate you.
No, there is only one kid. Different lighting, camera settings, etc. make it appear different on some photos.
Stay tuned.
Maciek
let me try to answer each of your questions in an orderly manner.
Assuming that's what you wanted?
Stay tuned.
Maciek
#92
Hello!
A cute MINI set is the theme of the day here. Red perforated leather with a white stripe. Really nice!
Here's our current code, valid through Friday May 13th: 7G7PI4RQ039
You can find us on Facebook at this link: http://www.facebook.com/pages/Redlin...s/370288098329
Take care
Maciek
A cute MINI set is the theme of the day here. Red perforated leather with a white stripe. Really nice!
Here's our current code, valid through Friday May 13th: 7G7PI4RQ039
You can find us on Facebook at this link: http://www.facebook.com/pages/Redlin...s/370288098329
Take care
Maciek
#93
Just one more question.....I have a Silver Horse Racing E-brake handle on my emergency brake. Will your E-brake boot fit nicely with this application?
The E brake handle is much like the one in your sample picture with the Hurst shifter.
Thanks for your very clear answers.
The E brake handle is much like the one in your sample picture with the Hurst shifter.
Thanks for your very clear answers.
#94
In general we can make boots fit flush with anything, as long as we know the right dimensions. If you could email or PM me some pictures of that ebrake handle I'd be happy to assist you in taking these.
Have a great day,
Maciek
#95
Well the sample picture I believe shows the stock ebrake handle, doesn't it?
In general we can make boots fit flush with anything, as long as we know the right dimensions. If you could email or PM me some pictures of that ebrake handle I'd be happy to assist you in taking these.
Have a great day,
Maciek
In general we can make boots fit flush with anything, as long as we know the right dimensions. If you could email or PM me some pictures of that ebrake handle I'd be happy to assist you in taking these.
Have a great day,
Maciek
#96
I have a very similar setup compared to what is shown in your sample picture except my shifter bezel and e-brake handle is black billet in colour and not satin.
The stock e-brake does not come with the satin piece that you see in your picture. The satin piece just slides over the stock e brake and is held in by two little screws.
I am just wondering if your e brake boot will fit nicely with that aftermarket piece in place (i.e. will it fit flush with it or bundle up excessively)? Unfortunately, in your sample picture the owner only ordered the shifter boot which looks like a very nice fit compared to the stock one.
The stock e-brake does not come with the satin piece that you see in your picture. The satin piece just slides over the stock e brake and is held in by two little screws.
I am just wondering if your e brake boot will fit nicely with that aftermarket piece in place (i.e. will it fit flush with it or bundle up excessively)? Unfortunately, in your sample picture the owner only ordered the shifter boot which looks like a very nice fit compared to the stock one.
#97
I have a very similar setup compared to what is shown in your sample picture except my shifter bezel and e-brake handle is black billet in colour and not satin.
The stock e-brake does not come with the satin piece that you see in your picture. The satin piece just slides over the stock e brake and is held in by two little screws.
I am just wondering if your e brake boot will fit nicely with that aftermarket piece in place (i.e. will it fit flush with it or bundle up excessively)? Unfortunately, in your sample picture the owner only ordered the shifter boot which looks like a very nice fit compared to the stock one.
The stock e-brake does not come with the satin piece that you see in your picture. The satin piece just slides over the stock e brake and is held in by two little screws.
I am just wondering if your e brake boot will fit nicely with that aftermarket piece in place (i.e. will it fit flush with it or bundle up excessively)? Unfortunately, in your sample picture the owner only ordered the shifter boot which looks like a very nice fit compared to the stock one.
the boot will work perfectly fine. I can't recall a picture right now, but I've seen some. The boot ends right below that handle.
Have a great day,
Maciek
#98
I am a little confused about the boot layout field. You can either order:
1. regular (like my stock items)
or
2. front to back axis of car
I am assuming I would select 1. even though 2. sounds like it would be the same thing for my car (i.e. 2005 Mustang GT)......and I would also end up paying extra.
Thanks,
Peter
1. regular (like my stock items)
or
2. front to back axis of car
I am assuming I would select 1. even though 2. sounds like it would be the same thing for my car (i.e. 2005 Mustang GT)......and I would also end up paying extra.
Thanks,
Peter
#100
Hey all!
Another leather ebrake handle cover in the line-up! This time on the cult car, Mazda RX7 FD (93+)!
And here's the discount code valid through Friday, May 27th: 7NHW74IB081
Our FB page with all current info is, as always: http://www.facebook.com/pages/Redlin...s/370288098329
Have a good weekend everyone!
Maciek
Another leather ebrake handle cover in the line-up! This time on the cult car, Mazda RX7 FD (93+)!
And here's the discount code valid through Friday, May 27th: 7NHW74IB081
Our FB page with all current info is, as always: http://www.facebook.com/pages/Redlin...s/370288098329
Have a good weekend everyone!
Maciek