Vintage Mustang Watts Link (1965-1973) Pre-Order
11-23-2005, 11:33 AM
#1
Thread Starter
Join Date: Jul 2005
Location:
Posts: 27
Vintage Mustang Watts Link (1965-1973) Pre-Order
We are just about to ramp up development on the 1965-1973 Mustang Watts Link. The unit will be similar to our current Watts Link. It will be a bolt-on unit, but can also be welded.
Our plan is to develop a rear suspension for the vintage GM, Mopar and Ford vehicles. The suspension will be modular from the standpoint that you can buy a complete system, or start small with one or two components, then work your way into a complete system. Obviously, we will start with a Watts link for the older Mustangs (1965-1973). The watts we can bang out pretty quickly (a few weeks), since we are 90% there already. The Watts link for the older cars should be a simpler design from our current Watts Link.
Beyond the Watts, we will be developing a complete 3 or 4 link system for the rear. It will utilize coilovers, LCA’s and the single third link or 2 UCAs. The decision between a 3 or 4 link system will depend on the room we have to work with. If it is a 4 link system, it will not simply replicate the current 4 link. It will actually work.
In an effort to solicit interest in the system, we will be offering a Pre-order for the Watts Link System. Much like we did for our TriLink last year. The pre-order will basically allow early “supporters” to pick up the product at a discount. So, if you are interested in such a product and have questions drop us an email and otherwise, Pre-Order today. Only place a Pre-Order us if you are truly interested in the system, since we will use the Pre-Order numbers to drive our first production run. The pre-order list will not be anything binding, it just helps us with production schedules. Once we are nearing actual production we will offer everyone on the list a discount. At that time you can decide to order or not.
If you would like to Pre-Order, simply GO HERE TO PRE-ORDER hit the "Add to Cart" button and follow through with the order process. For payment type select check/money order. Remember, at this point there is no liability for the Pre-Order. All you are doing is showing interest.
Our plan is to develop a rear suspension for the vintage GM, Mopar and Ford vehicles. The suspension will be modular from the standpoint that you can buy a complete system, or start small with one or two components, then work your way into a complete system. Obviously, we will start with a Watts link for the older Mustangs (1965-1973). The watts we can bang out pretty quickly (a few weeks), since we are 90% there already. The Watts link for the older cars should be a simpler design from our current Watts Link.
Beyond the Watts, we will be developing a complete 3 or 4 link system for the rear. It will utilize coilovers, LCA’s and the single third link or 2 UCAs. The decision between a 3 or 4 link system will depend on the room we have to work with. If it is a 4 link system, it will not simply replicate the current 4 link. It will actually work.
In an effort to solicit interest in the system, we will be offering a Pre-order for the Watts Link System. Much like we did for our TriLink last year. The pre-order will basically allow early “supporters” to pick up the product at a discount. So, if you are interested in such a product and have questions drop us an email and otherwise, Pre-Order today. Only place a Pre-Order us if you are truly interested in the system, since we will use the Pre-Order numbers to drive our first production run. The pre-order list will not be anything binding, it just helps us with production schedules. Once we are nearing actual production we will offer everyone on the list a discount. At that time you can decide to order or not.
If you would like to Pre-Order, simply GO HERE TO PRE-ORDER hit the "Add to Cart" button and follow through with the order process. For payment type select check/money order. Remember, at this point there is no liability for the Pre-Order. All you are doing is showing interest.
Thread
Thread Starter
Forum
Replies
Last Post
NorthAmericanTuning
S550 2015-2023 Mustang
3
03-18-2016 11:21 AM
