78 mustang II flywheel

Mustang Forums Mustang Classifieds Photo Gallery Calendars Search Live Chat Contact MF Sponsors
Mustang Recalls Mustang TSB's News Timeslips Timeline Wallpaper Member List Register Login

78 mustang II flywheel

Printable Version

Mustang Forum >> Ford Mustang Tech >> Classic Mustangs >> Mustang II Section >> 78 mustang II flywheel

Page: [1]

Message

<< Older Topic Newer Topic >>

78 mustang II flywheel - 4/5/2008 10:47:26 AM

getyousome111

Posts: 4
Joined: 4/4/2008
Status: offline

Could anyone possibly tell me what the original flywheel size diameter and tooth count was on the factory 4 speed .I have heard 10 inch 148 teeth ,10 1/2 157 who knows . I have looked in the forums searched and all the mustang II sites and been to the Auto Fair at Lowes motorspeedway a few times and asked all the ford people and know one has or seems to know anything about the 75 -78 cars or trans unless it is modified .This is the trans number RFD6Z-7006-CA ,bellhousing we have is D6ZA-6392-BC-1 .

Post #: 1

RE: 78 mustang II flywheel - 4/5/2008 10:49:54 AM

getyousome111

Posts: 4
Joined: 4/4/2008
Status: offline

Also if any one knows what other flywheels and bellhousings will work that would help. We were told an 81 flywheel would work but it wont fit in the bellhousing.

(in reply to getyousome111)

Post #: 2

RE: 78 mustang II flywheel - 4/5/2008 11:48:03 AM

gwb16

Posts: 80
Joined: 7/28/2006
Status: offline

I'll check the info that I have. I don't have it committed to memory. The bell housing is SPECIFIC to the Mustang II's. You'll have to some banging and bending or cutting and welding to get any other bellhousing to fit. It's smaller the "other" more prevelent bellhousings. If you're in a hurry, try checking out www.mustangii.net they have a ton of info over there. I'm not at home right now. Won't be able to answer you until late this evening or tomorrow morning.

_____________________________

Wayne
'78 Mustang II
'99 Eddie Bauer Expedition
'08 Limited Expedition
Smithfield, VA

(in reply to getyousome111)

Post #: 3

RE: 78 mustang II flywheel - 4/5/2008 12:14:00 PM

getyousome111

Posts: 4
Joined: 4/4/2008
Status: offline

Thanks i looked at that site for about 2 hours yesterday but couldnt find any thing specific about the size also tried putting part #`s in there seach section and it gave me an error . as of right know going to try 3.8 bellhousing out of newer stang old 4 speed and an old aluminum fly well my father in law has .He has tons of ford stuff just all in finding and identifiying .

(in reply to gwb16)

Post #: 4

RE: 78 mustang II flywheel - 4/6/2008 3:31:39 AM

gwb16

Posts: 80
Joined: 7/28/2006
Status: offline