I was just wondering how much Horsepower you guys think i have after all these Mods i did. Cobra intake, 65 MM throttle body, BBK EQ Lt headers, AFR 165 heads, Under drive pulleys, Mark VIII electric Rad Fan, Delited smog pump, Walbaro 255 fuel pump, Mac Cold air intake, Adjustable fuel presure reg set at 42, Timing set at 14. Still stock Cam and injectors. Was hoping for around 300, do you think i made it. If not what do you think i need to add. Many thanks, Aggie.
increase the cam to a xe270hr or a 15511 crower cam (.512 lift ) and spray it with 100 shot will get ya 300+ hp right now you are probly 270to 280 hp to the tire (best guess)
< Message edited by stangbanger87 -- 5/5/2008 7:46:40 AM >
Just got my July 08 issue of 5.0 Mustang Super Fords. Theres an article on Cam Shafts, on page 116 it talks about Speed Density Cams. Comp Cams has a cam # 35-512-8. How much of a H/P gain do you think there might be by adding this cam shaft. Thanks, Aggie.
This is how the article reads. The 35-512-8 is for 86-88 speed density mustangs. This cam with 0.480 inches of intake and exhaust lift and 206 (int)/ 212 (exh) degrees of duration at 0.050 inch, is compatible with a stock EEC-IV engine management and adds more horsepower and torque than the OEM camshafts for those particular years. Aggie.
Printable Version
How much H/P - 
