fullmonte60

i just picked up a set from ebay. they were $169 or b/o so i offered $100. they have others. if someone goes for it try $90 & see if they take it before you drop $100.
http://cgi.ebay.com/ebaymotors/ws/eB...76351&rd=1

__________________
2007 Grabber Orange 4.0/5 Spd
-FRPP duals w/GTBs, FRPP CAK, Shaftmasters d/s, BBK 70mm tb, SS headers, Accel coil, Hurst sts
-17" Bullitts, 3dcarbon grill, CDC seqs, SH rear panel, Roush h/s, DG wndw scoops, GT500 pedals, GT rockers, MG mirror covers, H13 silverstars
-GT f&r sways, FRPP M-2300-D brake upgrade, Steeda g-trac, SMR stb, CHE lcas, J&M panhard

danbevsv6rumbler

if only they were CARB legal and ceramic/titanium. I'd snag them in a hurry....

let us know what the quality is like when you get them!

__________________

Stangpede LA/OC


My Track Car/Daily Driver

1:37:98 @ Streets of Willow (CCW)
1:34:xx @ Streets of Willow (CW)

fullmonte60

will do. for a $100 it's worth a shot funny how they use the jba titanium ceramic part # in their listing! i'm gonna coat them with some high heat clear paint & let them sit a week or two before the install. toughen them up a bit.

__________________
2007 Grabber Orange 4.0/5 Spd
-FRPP duals w/GTBs, FRPP CAK, Shaftmasters d/s, BBK 70mm tb, SS headers, Accel coil, Hurst sts
-17" Bullitts, 3dcarbon grill, CDC seqs, SH rear panel, Roush h/s, DG wndw scoops, GT500 pedals, GT rockers, MG mirror covers, H13 silverstars
-GT f&r sways, FRPP M-2300-D brake upgrade, Steeda g-trac, SMR stb, CHE lcas, J&M panhard

Sancho805

i'm sure they will sound good but just wondering on the fitment.

__________________

:: 06 4.0 Stang :: Auto :: 3.73/T-Lok :: Bama Tuned :: C&L Intake ::
:: JBA H-Pipe Dual Exhaust :: 17" Bullitts :: F/R GT Anti-Sway Bars ::

fullmonte60

i'll mention what went obn iwhen i'm done

__________________
2007 Grabber Orange 4.0/5 Spd
-FRPP duals w/GTBs, FRPP CAK, Shaftmasters d/s, BBK 70mm tb, SS headers, Accel coil, Hurst sts
-17" Bullitts, 3dcarbon grill, CDC seqs, SH rear panel, Roush h/s, DG wndw scoops, GT500 pedals, GT rockers, MG mirror covers, H13 silverstars
-GT f&r sways, FRPP M-2300-D brake upgrade, Steeda g-trac, SMR stb, CHE lcas, J&M panhard

Stick03

I got my Pypes headers on Ebay for $189 and got a $30 mail in rebate. Perfect fitment, no problems.

__________________

"Just a boring little 4.0, nothing special really."

NocturnalV6

they look ok

__________________

fullmonte60

got 'em today. the flanges are true. i took a straight edgeto them. sprayed them with a couple of coats of duplicolor 1200 degree high heat ceramic paint. i wanted to do black but pep boys only had aluminum sooooooo. i'll do the install next weekend. i think i might put header wrap on too. they look just like the pic. just like jba's. i wonder why they put the 3rd hole on top in? the factory manifolds just use 2.

__________________
2007 Grabber Orange 4.0/5 Spd
-FRPP duals w/GTBs, FRPP CAK, Shaftmasters d/s, BBK 70mm tb, SS headers, Accel coil, Hurst sts
-17" Bullitts, 3dcarbon grill, CDC seqs, SH rear panel, Roush h/s, DG wndw scoops, GT500 pedals, GT rockers, MG mirror covers, H13 silverstars
-GT f&r sways, FRPP M-2300-D brake upgrade, Steeda g-trac, SMR stb, CHE lcas, J&M panhard

whitestang07

I was gonna get those but want to make sure of the quality and see if there is any gains

fullmonte60

fyi...the egr bolt is a 27mm open wrench.

__________________
2007 Grabber Orange 4.0/5 Spd
-FRPP duals w/GTBs, FRPP CAK, Shaftmasters d/s, BBK 70mm tb, SS headers, Accel coil, Hurst sts
-17" Bullitts, 3dcarbon grill, CDC seqs, SH rear panel, Roush h/s, DG wndw scoops, GT500 pedals, GT rockers, MG mirror covers, H13 silverstars
-GT f&r sways, FRPP M-2300-D brake upgrade, Steeda g-trac, SMR stb, CHE lcas, J&M panhard