No prob. You guys just let me know if there is anything I can do here in your new section to improve it as we go along. Go let your tree fiddy friends know and if we get enough traffic, I'll give you a full section.
hey guys, im new to the site, im trying to get to know some people.. i have a 94 gt, i am in the process of sinking a 351 block punched out to a 418 stroker.... the engine is just about done at the machine shop and i would like to get some imput on the do's and donts of sinking this kind of engine into my 94. i am pretty shure im going to hafto get different headers because the block is an inch higher and i was looking at the upper and lower intake systems because mine wont fit, also i was told i am going to hafto have the computer system totally revamped......... anyone have anything?
yeah some one probably makes conversion headers. you could also call around and give them your measurements to see if anyone makes long tubes that will fit. and for the computer you would need either a new one or get it set so that the injector firing order corresponds with the 351's firing order. it would probably be cheaper to go with a carb set up. instaed of dealing with the computer, unless you already have everything for efi. either way i would think you need a cowl hood.
good luck,
carl
__________________
86' hatch, kinda stock 460, kinda stock c6, lakewood 90/10's and 50/50's, stock v8 rear springs, coilover front, 8 pt bar. subframes
hey guys, im new to the site, im trying to get to know some people.. i have a 94 gt, i am in the process of sinking a 351 block punched out to a 418 stroker.... the engine is just about done at the machine shop and i would like to get some imput on the do's and donts of sinking this kind of engine into my 94. i am pretty shure im going to hafto get different headers because the block is an inch higher and i was looking at the upper and lower intake systems because mine wont fit, also i was told i am going to hafto have the computer system totally revamped......... anyone have anything?
Check with Sanderson Headers out of South San Francisco. They can make you a sweet set, if they already don't make them.
__________________
Sound clip http://h1.ripway.com/03YellowPony/S4300181.WAV
Sally's gone..
the REAL RedAss
the 5.0 in ur 94 should work with the 351 because the 5.0ho uses the 351w firing order correct?
__________________
Then said he unto them, But now, he that hath a purse, let him take it, and likewise his scrip: and he that hath no sword, let him sell his garment, and buy one. LUKE 22:36
And they said, Lord, behold, here are two swords. And he said unto them, It is enough. LUKE 22:38
OK 351 guys!!
