FINISHED SHAVED WINDOWS
#15
RE: FINISHED SHAVED WINDOWS
Here's what it looks like without turn signals, well almost. You can see the orange just a little. No need to shave or whatever just black it out and yes shave the front license plate indentation!
[IMG]local://upfiles/29840/8B6403A737B74D5F9A6FEF0317C20A82.jpg[/IMG]
[IMG]local://upfiles/29840/9578CD2F5DAE43E8B06EDE0BFBFACBA8.jpg[/IMG]
[IMG]local://upfiles/29840/8B6403A737B74D5F9A6FEF0317C20A82.jpg[/IMG]
[IMG]local://upfiles/29840/9578CD2F5DAE43E8B06EDE0BFBFACBA8.jpg[/IMG]
#16
RE: FINISHED SHAVED WINDOWS
thanks petepete, i just like to be different.
and don't worry guys i will shave the license plate indentation by next week. shaving the windows was a lot of work. it took about 3-4 hours of work not including prep, waiting for the fiberglass and bondo to dry, and going and buying the materials. the hardest part is shaping the bondo. the rear windows are flat as compared to the body being curved so you kind of have to stop in between layers, get it soaking wet and look at all the angles to make sure it is flowing right. plus the glass is inset from the body about 1/4 to 1/2 of an inch. the bumper/fender lines are a lot easier being all you do is fill in the gaps.
and sorry for the confusion blackpony, i wasn't trying to be an a$$hole or anything.
and don't worry guys i will shave the license plate indentation by next week. shaving the windows was a lot of work. it took about 3-4 hours of work not including prep, waiting for the fiberglass and bondo to dry, and going and buying the materials. the hardest part is shaping the bondo. the rear windows are flat as compared to the body being curved so you kind of have to stop in between layers, get it soaking wet and look at all the angles to make sure it is flowing right. plus the glass is inset from the body about 1/4 to 1/2 of an inch. the bumper/fender lines are a lot easier being all you do is fill in the gaps.
and sorry for the confusion blackpony, i wasn't trying to be an a$$hole or anything.
#19
RE: FINISHED SHAVED WINDOWS
Send pics after you have done the front bumper. I don't like the license plate cut out either. May tackle that, depending how it looks.
[IMG]local://upfiles/31119/45F0FEA9F18F48B3BF465613BCECE0C6.jpg[/IMG]
[IMG]local://upfiles/31119/45F0FEA9F18F48B3BF465613BCECE0C6.jpg[/IMG]
#20
RE: FINISHED SHAVED WINDOWS
Couldnt you shave the lower grille and get a hood an heat exhaust vent like the one here: http://www.mrbodykit.com/bodykits/hoods05_06.htm?