Pony on street scene gt fog look alike for v6?
#1
Pony on street scene gt fog look alike for v6?
Guys, i was interested in getting this, but i like the stock look of the pony in the middle.. Can you guys tell me how you put a pony on, and which one you got
Also can you post how much you payed for and where you got the grille
Also can you post how much you payed for and where you got the grille
#2
RE: Pony on street scene gt fog look alike for v6?
1. Took the pony of a V6 Grille.
2. Used expanded steel andbent it to match the angle of the center of the SS grille.
3. Clamped down the pony on onside and used a heat gun on the back side (from a good distance away). When it was just mailiable to bend, clamped down on the other side and let it cool.
4. Scrape off chrome on back side of pony where you will attach plastic rivets.
5. Apply rivets with krazy glue. When glue is cured, secure to grille with back side of rivets.
Depending on the size of the rivet you may need rubber gromets to make it fit snug.
Good Luck.
2. Used expanded steel andbent it to match the angle of the center of the SS grille.
3. Clamped down the pony on onside and used a heat gun on the back side (from a good distance away). When it was just mailiable to bend, clamped down on the other side and let it cool.
4. Scrape off chrome on back side of pony where you will attach plastic rivets.
5. Apply rivets with krazy glue. When glue is cured, secure to grille with back side of rivets.
Depending on the size of the rivet you may need rubber gromets to make it fit snug.
Good Luck.
Thread
Thread Starter
Forum
Replies
Last Post
AMAlexLazarus
AmericanMuscle.com
0
10-01-2015 09:21 AM
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM
mungodrums
Suspension
0
09-24-2015 10:12 PM