GTStang07

I received my ducktail today im so f***en happy right now. cant wait to put it on. does anyone know if its hard to put it on. can anyone do it? or does it take someone with a lil bit more experiace on bodywork?

Hufenstang

i dont know the answer to your questions but iDO want to see pics when your done!

edit: sorry accidently put Dont' but i meant to type "Do" [8D]

Anomalus1

Anywho, depends on what type of ducktail you ordered. If it's the gt500 (4 holes)or 3d500 (2 holes), they go directly into the stock holes (if you have a stock spoiler)and uses tape. It's simple to do. You just take off the stock spoiler, clean any extra tape off of it, replace with your new spoiler.

If you ordered the ducktail that tapes to the rearend of the car, you'll need to either have someone fill in the holes (if you have a stock spoiler) or cover them.

If you ordered any other type that requires drilling of extra holes (there's the ducktail that requires 2 extra holes apart from the stock holes - 6 total - can't remember thebrand atm) then either a bodyshop or you can do it, if you're confident. For the most part, any ducktail that requires drilling usually comes with a template you can place over your trunk to use as a guide.

mygt500

Easy install for the Cervinis! It basically is taped and the stock holes are covered up!

MUSTANGEXPERT

For the Cervini ducktail spoiler are all the holes covered up?

TPony

woohoo..lets seesome pics when done....

ytix

Hufenstang, I just had one of those unintended humor moments. I think your uncorrected post is hilarious, as you know the knee-jerk response to a post about a newly installed goodie is to request photos. Now, days later I can't stop laughing when I see this thread title in the title list. Instant classic!

mygt500

Yup! All are covered up! [IMG]local://upfiles/54958/BDAE140705E943F4ABEF8F9229F93586.jpg[/IMG]

[IMG]local://upfiles/54958/D6B1C4E1AE13485D8B69D762B0316B0F.jpg[/IMG]

Vista_Blue_GT

how does the side pieces of the cervinis ducktail put on are they just taped really good or what?

mattblasi

Yes it is just double sided tape, but first you must clean both surfaces well with a non oil based soap, then it is recommended by 3M that you use a pre adhesive on each surface then install the part and apply pressure.

MyGT500 is has his Cervni's kitted car, I have it on mine and JBailer has it on his. All of us love it. Its a great wing on the car.

Here is a back shot of my car the day I picked it up.
http://www.garybestkustumz.com/galle...ang&num=38