mustangTMI

I just bought some fender ponys with the alignment pins to put on my V-6 that does not have holes, what are the measurements and how should i take the pins off?

Any help appreciated

BlackStang08

Use a dremel or a dike to remove the pins. Here are the measurements I (and several others) have used to put on my emblems:



Thats 13 3/8 from the gap, 51/4 from the top of the emblem to door gap and 5 3/8 from the gap to the bottom of the emblem.

chrispcola

I dremeled mine and used those measurements as well...I just taped offthe marks (because I didn't have any grease pens or anything to mark with)and stuck it on....

BlackStang08

+1 for the tape. When in doubt, tape it out!

jwineco5

Tape is awsome!!!

addison85

A standard file works great too to shave those pins down.