Clear corner lenses
07-16-2008, 07:33 PM
#21
3rd Gear Member
Join Date: Dec 2006
Location: Chesapeake, Va.
Posts: 523
RE: Clear corner lenses
ORIGINAL: HazardSports
No NJ3I haven't taken the time to look hard at them and I have the OEM ones in the shed to compare with. Maybe this week=end. Do you have the same issue or a suggestion ?
No NJ3I haven't taken the time to look hard at them and I have the OEM ones in the shed to compare with. Maybe this week=end. Do you have the same issue or a suggestion ?
07-17-2008, 02:08 PM
#22
2nd Gear Member
Join Date: May 2006
Location: San Antonio TX
Posts: 453
RE: Clear corner lenses
I just installed the stangmods kit last night and the smaller bulb on the front sits a little loose on mine as well. I just put some silicone sealant around the edge and called it a day, the bulb shouldn't be goin anywhere.
stangmods clearcorners and sidemarkers. FTW
stangmods clearcorners and sidemarkers. FTW
07-19-2008, 02:03 PM
#23
3rd Gear Member
Join Date: Dec 2006
Location: Chesapeake, Va.
Posts: 523
RE: Clear corner lenses
I removed my clear corners today and I couldn't see any difference on the small bulb hole than OE. I did notice when I turned the bulb socket it was tight until I made a complete 1/4 turn then all the sudden the socket was loose. So I turned the socket a full 1/4 turn clockwise then a slight turn counter clockwise, the socket is now tight. I used a little clear silicone around the base of the socket, like merdix9, so it won't turn and it should still be easy to remove when I have to replace a bulb.
Thread
Thread Starter
Forum
Replies
Last Post